Cold Finger Condenser - RE402 & RE402P
8Pages

{{requestButtons}}

Catalog excerpts

Cold Finger Condenser - RE402 & RE402P - 1

Rotary Eva porators Rotary evaporators are commonly used for separating solvents, the Stuart® range offers simple control & a variety of glassware configurations, vertical, diagonal & cold finger condensing depending on your requirements. All configurations are available with plastic coated glass.

Open the catalog to page 1
Cold Finger Condenser - RE402 & RE402P - 2

• Digital control • Can be orientated for left or right handedness • Simple, counterbalanced lift mechanism • PTFE/glass liquid pathway for chemical inertness • Long life graphite impregnated PTFE vacuum seal • Efficient flask and vapour tube ejection system A Rotary evaporator is a distillation unit that incorporates an efficient condenser with a rotating sample flask. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, the sample or Florentine flask can...

Open the catalog to page 2
Cold Finger Condenser - RE402 & RE402P - 3

Glass set 00 Diagonal coil condenser, Vapour tube for diagonal condenser, Receiving flask 1000ml, Florentine flask 1000ml, Feed tube with stopcock, Vacuum seal, Conical joint clip, Spherical joint clip Glass set 01 Vertical coil condenser, Vertical coil adaptor, vapour tube for vertical condenser, Receiving flask 1000ml, Florentine flask 1000ml, Feed tube with stopcock, Vacuum seal, Conical joint clip, Spherical joint clip, Cooler holder, Support bar clamp, Cooler support bar Glass set 02 Dewar condenser, Vertical coil adaptor, Vapour tube for vertical condenser, Receiving flask 1000ml,...

Open the catalog to page 3
Cold Finger Condenser - RE402 & RE402P - 4

Evaporating (Florentine) flasks • Florentine type flasks for use with all glassware sets. 29/32 socket. Ordering Information Model FD50/4RE FD100/4RE FD250/4RE FD500/4RE FD500/4REP FD1L/4RE FD1L/4REP FD2L/4RE FD2L/4REP Description Evaporating flask 50ml Evaporating flask 100ml Evaporating flask 250ml Evaporating flask 500ml Evaporating flask 500ml plastic coated Evaporating flask 1000ml Evaporating flask 1000ml plastic coated Evaporating flask 2000ml Evaporating flask 2000ml plastic coated Receiving flasks • Receiving flasks for use with all glassware sets. S35 spherical socket Ordering...

Open the catalog to page 4
Cold Finger Condenser - RE402 & RE402P - 5

Diagonal condenser, glass set 00 Diagonal condenser, plastic coated, glass set 00P Vertical condenser, glass set 01 Vertical condenser, plastic coated, glass set 01P Cold finger condenser, glass set 02 Cold finger condenser, plastic coated, glass set 02P Feed tube/ vacuum release, all glass sets Vapour tube diagonal condensers, glass sets 00 & 00P Vapour tube for vertical coil condensers, glass sets 01, 01P, 02, 02P Vacuum seal, all glass sets PTFE screwthread connectors, all glass sets, pack of 2 Spherical joint clip for receiving flask, all glass sets Plastic joint clip for evaporating...

Open the catalog to page 5
Cold Finger Condenser - RE402 & RE402P - 6

A c c e s s o r y Va c u u m P u m p s Fixed pressure pump, RE3011C Variable vacuum pump, RE3022C • Quiet operation, no vibration • Maintenance free drive system • Designed for permanent operation • Light weight, rugged design The RE3011C is a powerful, compact vacuum pump. It features a rugged design combined with simple on/off operation, making it the perfect choice for delivery of a quick, reliable vacuum. Both pumps offer a dry, oil free, vacuum from a reliable maintenance free diaphragm pump. Either pump is therefore ideal for use with the Stuart rotary evaporator or for any...

Open the catalog to page 6
Cold Finger Condenser - RE402 & RE402P - 7

Digital water bath, RE400DB Digital oil bath, RE400OB ACAUTI0N RE400DB Digital Water Bath Digital temperature display Corrosion resistant bowl Easy to clean Integrated carry handle (RE400DB) Cool touch outer case These precise digital baths have been specifically designed to be used with the Stuart rotary evaporators to give maximum efficiency for the smallest footprint. The clear LED digital display shows the actual bath temperature or the set temperature. The RE400DB is suitable for lower temperature applications whereby the RE400OB can be used with oil for higher temperature...

Open the catalog to page 7
Cold Finger Condenser - RE402 & RE402P - 8

Accessory Recirculating Coolers SRC4 Recirculating Cooler • Digitally set temperature • Easy to read LED display • Quiet operation • Powerful 450W cooling capacity • Safety cut out feature The recirculating cooler offers powerful cooling for an external device. By accurately controlling the temperature of your cooling medium down to -20°C, efficiency of operations such as condensing can be greatly improved. A recirculating cooler is not only much more powerful than conventional water cooling, but is also an ideal alternative when water consumption is an issue for economical, environmental...

Open the catalog to page 8

All Cole-Parmer catalogs and technical brochures

  1. Homogenisers

    4 Pages

  2. SI505

    2 Pages

  3. Centrifuge

    4 Pages

  4. SB161-3

    1 Pages

  5. SRC4

    1 Pages

  6. SHM1

    1 Pages

  7. SHM2

    1 Pages

  8. Hotplates

    1 Pages

  9. SHM Probes

    2 Pages

  10. W6

    1 Pages

  11. HM Series

    1 Pages

  12. SBHCONC/1

    1 Pages

  13. SBH130

    1 Pages

  14. Mini Stuart

    4 Pages

  15. BioCote®

    3 Pages

  16. SI505

    4 Pages