AUTOCLAVE CHAMBER & PIPING CLEANER • NON TOXIC, NON POLUTING CLEANING POWDER. • CLEANS THE CHAMBER. PIPING AND WATER RESERVOIR. • KEEPS THE AUTOCLAVE CLEAN AND FREE OF WATER DEPOSITS BUILT AROUND THE CHAMBER.PIPING SYSTEM. AND WATER RESERVOIR. • SPECIAL FORMULATION FOR STEAM STERILIZERS. • CLEANS SURFACE OF STAINLESS STEEL, COPPER. SILICON RUBBER. PLASTIC. ...ETC. PLEASE NOTE ; FOR EXTERNAL USE ONLY - NOT EDIBLE CHAM-MATE clean procedures: Basically CHAM-MATE is functioned in water. 1. For Class-B vacuum functioned autoclaves, or autoclaves with independent steam generator. the CHAM-MATE must be mixed wilh water, first. (1 bag mixed into 2,000cc water), And then, pouring the mixed CHAM-MATE into the chamber, and start working cycle. 1-1. For Class-S no vacuum autoclaves (with auto-add water function), put the CHAM-MATE powder into the chamber directly, and start the working cycle. 1-2. For Class-N (manual add water function), put the CHAM-MATE powder into the chamber Directly. And then, pouring water into the chamber, and start working cycle. PLEASE NOTE: Running one sterilization cycle, (without the dry function) . 2. Drain off all the balance water from the chamber and water reservoir. 3. Open the door, wipe the chamber and the door with a wet, non-lint cloth. PS:Use one more bag of CHAM-MATE and recycle again as above procedures, if there are dregs in the chamber still. NOTE: "For chamber and piping system clean only." CHAM-MATE quantity to be used: Chamber size under 30 liter—1 bag cham-mate. Chamber size over 100 liter—-1 bag more per 100 liter more. STURDY INDUSTRIAL CO,.LTD.