SuperMicrom Series SuperMicrom Series - Full Features I The SuperMicrom Series represent Sturdy's advanced tabletop autoclaves for solid, wrapped, tubal and liquid (optional) sterilization. These autoclaves use Microprocessor Design, providing smart logic control for precision temperature monitoring and a full range of settings for diagnostics, drying and pre-programmed sterilization presets. The SuperMi- crom autoclaves also feature a powerful vacuum pump for thorough inside-out steriliza- tion of tubal instruments such as syringes and dental handpieces. These SuperMicrom products are primarily differentiated by Chamber size (see table oppo- site page). All four SuperMicroms share identical control Panels. The SA-300VMA is addi- tionally an upright vertical autoclave and is suitable for taller instruments (e.g. flasks) often used in Lab and Research centers. Standard Control Panel • Temp 121° or 135° • B.D. & Pump Test Diagnostics • 0 to 40 min Dry, Redry • Prion Pathogen Preset • Lifetime 7 years • Auto Water Fill Pressure Overload Protection ■ Overheat Protection Pressure Auto Door Lock ■ Emergency/Reset Buttons Pressure Safety Valve DOOR OPEN LOW WATER

Comparison Charts Construction & Power Tabletop Models & Lab Series 1 - "Tank" - Internal Water Tank with auto-chamber-fill, "Piped" - uses local water plumbing with auto-fill, "Manual" - must add water manually for each session, "Tank-Man" Contains Water Tank but still requires knob to be manually turned on/off to fill chamber. Other Notes - Chamber and Door material is Stainless Steel #304 (#316 is optional) - Standard Accessories for SA-232/232X, SA-252F/300H, SA-230/260FA, SA-230/260MA: Heater Cover / Sterilization Box. Optional Accessories are Tray set / Pouch Rack. - Standard Accessories...

Comparison Charts S - Standard 1 - Pressure & Temperature indicated on same gauge Other Notes: O - Optional 2 - Includes separate Jacket and Chamber pressure gauges The Manual-Pointer "Sterilization Timer" and "Dry Timer" are combined into one dial O* - For Auto-Pointer only 3 - Standby allows the Autoclave to maintain jacket temperatures betweeen sterilization sessions. 4 - Progress bar or Progress lights 5 - Excessive Temperature/Pressure Alarm