Salter Labs® A Multifunction Oxygen Concentrator Indicator OXYGEN PERCENTAGE % PRESSURE PSIG . . . With microprocessor logic and ultrasound technology there is no need to carry a tool box full of test equipment to measure concentrator performance or spot check LOX systems. One simple tubing connection and you are ready to go! It comes complete with a carrying case and a 9-volt battery pre-installed. All in One - a small hand held unit which delivers all three (3) essential validation checks required to assure proper oxygen concentrator performance. • Oxygen percent of delivered gas • Output pressure in PSIG or kPa • Output flow rate in LPM Minimal Maintenance costs… • DC powered with a single standard 9-volt battery and a low battery warning display • NO FUEL CELL to replace . . . ever • Automatic power shutoff after five minutes prolongs battery life • No special tools required to replace battery and the battery is included! No Calibration required … • Microprocessor factory set electronic calibration • If calibration or verification is required to meet company or local standards, it can be performed on site in minutes with no special equipment ® The PRO2 check Elite® wherever oxygen concentrators are used: Home, Hospital, Hospice, Assisted Living or Extended Care Facilities

Salter PRO2 check Elite® a Multifunction Oxygen Concentrator Indicator This lightweight hand held device is a welcome addition for care providers or repair technicians working with oxygen concentrators. In one small, compact battery operated instrument you have the ability to readily check three vital parameters of a concentrator’s function . . . OXYGEN PERCENTAGE delivered, FLOW RATE LPM, PRESSURE PSIG or kPa*. In the past, these value checks would require three (3) separate instruments plus the time to connect all three instruments to check each parameter separately. Each test instrument requires...