Applications: Water and wastewater treatment Fermentation Industrial Process Environment Features: Waterproof and dustproof design 96 x 96mm microprocessor D.O. transmitter Compatible with WTW TriOxmatic D.O. sensors or Mettler Toledo InPro D.O. sensors Measuring unit: %, ppm, mg/l Salinity correction & Atmospheric pressure correction User-friendly operation with text and graphic illustration, clear signs and easy to understand Large LCM display with auto-sense backlight and contrast setting function Sensor slope performance display Sensor self diagnosis for TriOxmatic 700 D.O. sensor Simultaneous display of measurement value and temperature Automatic temperature compensation Two sets of isolated current output DC 0/4~20mA, Max.500Ω Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis With password and multi-key design, enhanced security protection Automatic sensor clean function with programmable time interval LED indicated alarm or washing status signal IP 65 (NEMA 4X) DC-5110RS only: Measuring value can be selected for figure or chart display Trace mode can display historical measured value curve from 3-minute to 4-week program Equipped with logbook function Equipped with one analog output and RS-485 interface Mettler Toledo D.O. sensor

Intelligent Dissolved Oxygen Transmitters DC-5110/DC-5110RS Specifications: Model Measuring mode % mg/L Measuring range ppm Temp. % mg/L Resolution ppm Temp. % mg/L Accuracy ppm Temp. Temperature Compensation Salinity correction Pressure correction Ambient temperature Storage temperature % / ppm / mg/L / TEMP. 0 ~ 600% (Depends on the sensor) 0~60.00 mg/L (Depends on the sensor) 0~60.00 ppm (Depends on the sensor) 0~140°C (Depends on the sensor) 0.1 % 0.01 mg/L / 0.001 mg/L 0.01 ppm / 0.001 ppm 0.1℃ ±0.5%±1Digit ±0.2°C±1Digit with temperature error correction function NTC 30K or NTC 22K automatic...