*mymedicalexpo

IT-8100-RS

Product catalog summary

Applications: The document outlines the use of a microprocessor ion transmitter for monitoring wastewater treatment and effluent in semiconductor, solar panel, and LCD industries.

Features: The transmitter features a 144 x 144 mm design, waterproof and dustproof capabilities, and uses the ISE method for selectivity. It includes a large LCD display with programmable illumination, automatic calibration, self-test, error code indication, and simultaneous display of measurement and temperature. It supports NTC 30KΩ or PT-1000 temperature sensors, has security features, isolated current output, analog output, RS-485 interface, programmable contact outputs, and an automatic sensor cleaning function. It is IP 65 (NEMA 4X) rated.

Specifications: The IT-8100-RS model includes a microprocessor ion transmitter with optional accessories such as combined electrodes, standard solutions, TISAB, various ion-selective electrodes, flow chamber, immersion electrode holder, auto clean system, and sunshield. It measures free fluoride ions and may be affected by ions like Al and Fe. Sample conditions include pH 5-10, temperature 0-50ºC, conductivity minimum 500 s/cm, and flow rate 1-20 cm/s.

Measuring Modes: The device measures ion type, concentration (ppm, mg/l), mV, and temperature with auto and manual ranges. It offers high accuracy and repeatability, with automatic temperature compensation and calibration modes.

Technical Details: The transmitter operates with a power supply of 100V~240VAC, supports wall, pipe, or panel mounting, and has dimensions of 144 mm × 144 mm × 115 mm. It weighs 0.8 kg and includes features like a large LCD display, isolated DC output, RS-485 interface, and programmable settings for contact and wash time.

Notes: The transmitter is designed to measure free fluoride ions only, and certain ions may interfere with measurements. Specifications and appearance are subject to change without notice.

Catalog excerpts

Applications: For monitoring wastewater treatment and effluent of semiconductor, solar panel and LCD industries Features: 144 x 144 mm Microprocessor Ion Transmitter Waterproof and dustproof designs ISE (ion selective electrode) method provides excellent selectivity Large LCD display with auto-sense AUTO/ON/OFF programmable illumination Automatic function: auto cal, self-test, and error code indication 2/3 point auto calibration, show offset and slope after calibration Simultaneous display of measuring value and temperature NTC 30KΩ or PT-1000 temperature sensor auto-recognizable With password and multi-key design, security protection enhancement Isolated current output DC 0/4-20 mA, max. load 500Ω Equipped with one analog output and RS-485 interface (Modbus protocol) Hi/Lo two limited contact outputs with programmable set-points and hysteresis Gradually continuous sample measurements average program to enhance stability Automatic sensor clean function with programmable time interval and hysteresis LED indicated alarm and washing status signal Real time clock display function IP 65 (NEMA 4X

Open the catalog to page 1

Microprocessor Ion Transmitter IT-8100-RS Specifications Model Measuring modes Measuring range Temp. Concentration 0.1 ±10% of reading (Depends on ISE sensor and sample) ±0.2°C ±1Digit (with temperature error-correction function) Temperature compensation Automatic with PT-1000 / NTC-30K or manual adjustment Calibration mode 2 or 3 points calibration, Offset calibration (13 range selectable) Ambient temperature Storage temperature Input impedance Large LCD display with environment light sensor auto/manual illumination function Analog output Isolated DC 0/4~20mA corresponding to Ion concentration,...

Open the catalog to page 2

IT-8100-RS

IT-8100-RS

Catalog excerpts

All Suntex Instruments catalogs and technical brochures