Tailgate Hanger | GUO153 Operator’s Manual for GUO143 Truck Loader Leaf Vacuum Warning: Please read and thoroughly understand all instructions before operating. Failure to follow safety rules and other basic safety precautions may result in serious personal injury. Keep these instructions in a safe and easily accessible place so that they can be referred to when needed. Retain these instructions to assist in future servicing. superhandyus.com © SuperHandy All Rights Reserved | Version 1.0

Part List Support Bracket Left & Right Support Arm

Assembly Recommended Tools 12mm Open-end Wrench 13mm Open-end Wrench 24mm Open-end Wrench (x2) 1. Fix the hitch bar to the support bracket with 4 M10x70 bolts and 4 M10 nuts. (Fig.01) M10 Nut 2. Flip the component that was installed in the previous step to its reverse side. 3. Insert 2 M8x25 bolts through the aligned holes, ensuring they go into the hitch bar's inner tube. 4. Screw 1 M8 nut onto each bolt and tighten to lock the parts. (Fig.02) M8x25 Hex Bolt (into the Hitch Bar)

5. Attach the left and right support arms to the bracket using 4 M10x60 bolts and M10 nuts. (Fig.03) Fig. 03 6. Insert the tailgate hanger into the leaf vacuum and secure it with 2 sets of M16x90 bolts and M16 nuts. (Fig.04)

7. Loosen the 4 star bolts but do not remove them, then lift the 2 handle upward. (Fig.05) Star Bolt Star Bolt Star Bolt Star Bolt

8. Remove the 4 M8x30 bolts and M8 nuts. Adjust the push rod forward or backward to fit your truck‘s tailgate thickness, then re-lock the assembly by tightening the bolts and nuts. (Fig.06)

9. Hook the assembly onto the truck's tailgate. First, press down on both handles to lock them in place. Then, tighten the four star bolts to fully secure it. (Fig.07) Star Bolt

Thank you for supporting our brand! Great Circle USA Support Line: 1-866-493-0524 [email protected] www.superhandyus.com Follow us on social media @SuperHandy