STEINMANN PINS

Product catalog summary

Specifications:
The document outlines the specifications for Steinmann pins and related surgical instruments. The pins are made of stainless steel, featuring a trocar point and a triangular shank end.

Steinmann Pins:
The pins are available in various diameters and lengths, as follows:

Diameter: 3.5 mm, 4.0 mm, 4.5 mm, and 5.0 mm.
Length: Ranges from 120 mm to 300 mm, depending on the diameter.

Instrumentation:
The document lists several instruments used with Steinmann pins, including:

Wire Cutters: Available in standard and lateral types.
Jacobs Chuck: A cannulated "T" handle with a key, measuring 120 mm.
Bending Rod: Used for bending needles, with a total length of 120 mm.

References and Models:
Each item is identified by a reference number and, where applicable, a model or pattern size (small, medium, large) and aperture dimensions.

Catalog excerpts

SPECIFICATIONS: Material: Stainless steel. Point: Trocar. Triangular shank end. DIÁMETRO DIAMETER 3,5 mm. 3,5 mm. 3,5 mm. 3,5 mm. 3,5 mm. 3,5 mm. 3,5 mm. 4,0 mm. 4,0 mm. 4,0 mm. 4,0 mm. 4,0 mm. 4,5 mm. 4,5 mm. 4,5 mm. 4,5 mm. 5,0 mm. 5,0 mm. INSTRUMENTAL CLAVOS DE STEINMANN STEINMANN PINS INSTRUMENTATION ESTRIBOS DE STEINMANN STEINMANN BOWS REFERENCIA REFERENCE 6070-001 6070-002 6070-003 MODELO PATTERN Pequeño / Small Mediano / Medium Grande / Large 6076-000 ALICATE CORTA-ALAMBRE WIRE CUTTER 6077-000 CORTA-ALAMBRE LATERAL LATERAL WIRE CUTTER 6090-000 MANDRIL JACOBS, MANGO EN "T" CANULADO 120 mm. CON LLAVE JACOBS CHUCK, CANNULATED "T" HANDLE 120 mm. WITH KEY 6123-001 VARILLA PARA DOBLAR AGUJAS Longitud total: 120 mm. BENDING ROD Total length: 120 mm.

Open the catalog to page 1

All Surgival catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list