1. Catalogs
  2. Surgival
  3. SURGIFEET WEIL TYPE SCREW

SURGIFEET WEIL TYPE SCREW

SURGIFEET WEIL TYPE SCREW

SURGIFEET WEIL TYPE SCREW

Product catalog summary
Product Overview:
SURGIFEET® Weil type screw is made from Titanium Ti6A14V and is available in lengths of 11, 12, 13, 14, and 15 mm. It is designed to be self-drilling and self-tapping with a diameter of 2mm and features a twist-off mechanism.
Technical Specifications:
The screw is used in cervicocapital osteotomy procedures, particularly in cases of hyperpressure of the metatarsal heads of triphalangeal digits, with or without metatarsophalangeal dislocation. A triple cervicocapital osteotomy is recommended when anticipated shortening exceeds 3 mm.
Indications:
The Weil type screw is indicated for use in procedures requiring a low profile flat head with a device featuring two grooves.
Surgical Technique:
  • Perform an osteotomy parallel to the sole of the foot, starting 3 mm in front of the joint cartilage.
  • Introduce the needle and measure the screw length.
  • Insert the Weil type screw, maintaining the osteotomy with a reduction clamp. Avoid excessive torque to prevent breakage.
  • Flex the anchoring device to break it, followed by final tightening with a screwdriver.
Product References:
Various references are provided for different screw lengths and the complete SURGIFEET® set.
Contact Information:
SURGIVAL COMERCIAL, located in Barcelona, Spain, and the factory in Valencia, Spain, provide contact details for further inquiries.
See more

Catalog excerpts

SURGIFEET WEIL TYPE SCREW-1

® Tornillo tipo Weil Características técnicas Technical details Material: Titanio Ti6A14V Material: Titanium Ti6A14V Longitud: 11, 12, 13, 14, 15 mm Length: 11, 12, 13, 14, 15 mm Auto-perforante Self-drilling Ø 2mm Cabeza plana de bajo perfil y dispositivo de 2 ranuras Low profile flat head and device with 2 grooves Auto-roscante Self-tapping Indicaciones Tornillo tipo Weil Indications for Weil type Screw Osteotomía Cervicocapital: En la hiperpresión de las cabezas metatarsianas de los dedos trifalángicos, con o sin luxación metatarsofalángica en que la fórmula metatarsal es index plus minus. Osteotomía Cervicocapital triple: En este caso debe realizarse cuando los acortamientos previstos sean mayores de 3 mm. Cervicocapital Osteotomy: In the hyperpressure of the metatarsal heads of triphalangeal digits,with or without metatarsophalangeal dislocation, in which the metatarsal formula is index plus minus. Triple Cervicocapital Osteotomy: In this case, this should be carried out when the anticipated shortening is greater than 3 mm.

 Open the catalog to page 1
SURGIFEET WEIL TYPE SCREW-2

Técnica Quirúrguica Surgical Technique 1 1. Osteotomía paralela a la planta del pie. Comenzar en la zona dorsal de la cabeza a 3 mm delante del cartílago articular. Una vez realizada, desplazar la cabeza también hacia proximal hasta obtener la posición deseada. Osteotomy parallel to the sole of the foot. Begin in the dorsal area of the head, 3mm in front of the joint cartilage. Once completed, also move the head proximally until the desired position is obtained. 2. Introducción de la aguja. Introduction of the needle. 3. Medición de la longitud del tornillo. Measurement of the length of the screw....

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.