
Catalog excerpts

SWAN Analytische Instrumente AG CH-8340 Hinwil/Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Monitor AMI Codes-II O3 Data sheet no. DenA2544X3000 Complete monitoring system for the automatic, continuous measurement of ozone in pharma water and industrial high purity water applications. Monitor AMI Codes-II O3 For the continuous online determination of ozone based on the DPD colorimetric method (DIN 38404-3). Measuring range: 0 to 500 ppb Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers. All usual dosing devices for disinfectants control can be connected either through relays or analog output signals. Two independent controllers can operate simultaneously. Dosing of disinfectant can be interrupted automatically with an external signal. Alarm display and activation of alarm relay when user defined, critical limits for a measurement value are reached. Continuous, automatic monitoring of main instrument functions (dirty photometer, sample flow, reagents). Large back-lit LCD display showing all measured values and status information simultaneously. Factory tested, ready for installation and operation. Specific features for pharmaceutical industry: Audit Trail, Performance verification and a Validation Package. Accessories: Validation Package (IQ, OQ, PQ) Verification Kit Instrument Option: Communication interface Monitor AMI Codes-II O3 DC Option: [ ] Profibus DP & Modbus RTU interface (RS-485) [ ] HART interface [ ] Validation Package 06/2020 Subject to change without notice
Open the catalog to page 1
SWAN Analytische Instrumente AG CH-8340 Hinwil/Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Ozone measurement Measuring range: 0 – 500 ppb Limit of detection Cycle time: Monitor AMI Codes-II O3 Data sheet no. DenA2544X3000 Electrical Connection Scheme Accuracy: 1 ppb or 5% (whichever is greater) 1 ppb 5 – 10 min. (default: 6 min) Transmitter Specifications and Functionality Electronics case: Aluminum Protection degree: IP 66 / NEMA 4X Display: backlit LCD, 75 x 45 mm Electrical connectors: screw clamps Ambient temperature: -10 to +50 °C Limit range of operation: -25 to +65...
Open the catalog to page 2All Swan Analytical Instruments catalogs and technical brochures
-
Swansensor pH/Redox AY
1 Pages
-
Monitor AMI Turbitrace
2 Pages
-
Monitor AMI Turbitrack
2 Pages
-
AMI INSPECTOR
2 Pages
-
Swansensor PHARMACON
1 Pages
-
Monitor AMI LineTOC
2 Pages
-
Monitor AMI Turbiwell 7027
2 Pages
-
Monitor AMI Oxytrace QED
2 Pages
-
Monitor AMI Rescon
2 Pages
-
Redox Calibration Solution
9 Pages