Monitor AMI Oxytrace QED
1 / 2Pages

SWAN Analytische Instrumente AG CH-8340 Hinwil, Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Monitor AMI Oxytrace QED Data sheet No. DenA2245X000 Monitor for continuous measurement of dissolved oxygen in high purity water with integrated auto verification. Monitor AMI Oxytrace QED Complete system mounted on stainless steel panel:  Transmitter AMI Oxytrace QED in a rugged aluminum enclosure (IP 66).  Flow cell QV-Flow PMMA OTG QED made of acrylic glass with needle valve and digital sample flow meter on mounting angle made of stainless steel.  Swansensor Oxytrace G with three electrode set-up (cathode, anode and guard) and integrated NT5k temperature sensor. AMI Oxytrace QED Dissolv ed Ox ygen M onitor  Faraday electrode for the automatic or manual verification by electrochemically generated oxygen concentration in the ppb range.  Factory tested, ready for installation and operation. Specifications:  Measuring range (at 25°C): 0.01 ppb to 20 ppm O2 or 0 to 200% saturation  Automatic air pressure compensation  Automatic temperature compensation  Automatic surveillance of electrolyte  Faster initial response time after maintenance due to silver guard  Simultaneous measurement of dissolved oxygen, sample temperature and sample flow.  Big backlit LC display for the reading of measuring value, sample temperature, sample flow and operating status.  Easy user menus in English, German, French and Spanish. Simple programming of all parameters by keypad.  Two current outputs (0/4 - 20 mA) for measured signals (3rd output optional).  Electronic record of major process events and calibration data. Monitor AMI Oxytrace QED DC Option: [ ] 3 current signal output (0/4 – 20mA) [ ] Profibus DP & Modbus RTU interface (RS-485) [ ] HART interface 06/2020 Subject to change without notice

SWAN Analytische Instrumente AG CH-8340 Hinwil, Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Dissolved Oxygen Measurement Monitor AMI Oxytrace QED Data sheet No. DenA2245X000 Electrical Connection Scheme Swansensor Oxytrace G with three electrode set-up (cathode [gold], anode [silver] and guard [silver]) with integrated NT5k temperature sensor. Measuring range Resolution 0.01 to 9.99 ppb 0.01 ppb 10 to 199.9 ppb 0.1 ppb 200 to 1999 ppb 1 ppb 2 to 20 ppm 0.01 ppm 0-200% saturation 0.1% saturation Automatic range switching Automatic temperature and air pressure compensation....