
Catalog excerpts

SWAN Analytische Instrumente AG CH-8340 Hinwil/Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Monitor AMI Rescon Data sheet No. DenA23431X00 Complete monitoring system for the automatic, continuous measurement of the specific resistivity / specific conductivity in high purity water. Monitor AMI Rescon Complete system mounted on stainless steel mounting panel: Transmitter AMI Rescon in a rugged aluminum enclosure (IP 66). Swansensor RC-U high precision two-wire electrode made of stainless steel with integrated NTC temperature probe for automatic temperature compensation. Flow cell QV-Hflow made of stainless steel with manual flow adjustment valve and digital, high temperature sample flow meter. Factory tested, ready for installation and operation. Specifications: Measurement range: - Resistivity: 0.01 to 18.18 MΩ-cm - Conductivity: 0.055 to 1000 S/cm Big backlit LC display for the reading of measuring value, sample temperature, sample flow, temperature compensation type and operating status. Easy user menus in English, German, French and Spanish. Simple programming of all parameters by keypad. Wide range of selectable temperature compensations for different sample conditions. Alarm function according to the limits in USP<645>. Electronic record of major process events and calibration data. Data logger for 1’500 data records stored at a selectable interval. Two current outputs (0/4 - 20 mA) for measured signals. Accessory: Precision test resistor plug for verification of transmitter according to USP<645>. Monitor AMI Rescon DC Option: [ ] 3rd current signal output (0/4 – 20mA) [ ] Profibus DP & Modbus RTU interface (RS-485) [ ] HART interface 06/2020 Subject to change without notice
Open the catalog to page 1
SWAN Analytische Instrumente AG CH-8340 Hinwil/Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Conductivity Measurement Monitor AMI Rescon Data sheet No. DenA23431X00 Electrical Connection Scheme Swansensor RC-U (k = 0.01 cm ) with integrated NT5K temperature sensor. Measuring range Resolution 0.01 to 18.18 MΩ-cm 0.01 MΩ-cm 0.055 to 2.999 S/cm 0.001 S/cm 3.00 to 29.99 S/cm 0.01 S/cm 30.0 to 99.9 S/cm 0.1 S/cm 100 to 1000 S/cm 1 S/cm Automatic range switching. System accuracy 0.01 to 18.18 MΩ-cm 0.05 to 20 S/cm 20 to 1000 S/cm Periodic accuracy test with ultra high...
Open the catalog to page 2All Swan Analytical Instruments catalogs and technical brochures
-
Swansensor pH/Redox AY
1 Pages
-
Monitor AMI Turbitrace
2 Pages
-
Monitor AMI Turbitrack
2 Pages
-
AMI INSPECTOR
2 Pages
-
Swansensor PHARMACON
1 Pages
-
Monitor AMI LineTOC
2 Pages
-
Monitor AMI Turbiwell 7027
2 Pages
-
Monitor AMI Codes-II O3
2 Pages
-
Monitor AMI Oxytrace QED
2 Pages
-
Redox Calibration Solution
9 Pages