Swansensor PHARMACON
1 / 1Pages

SWAN Analytische Instrumente AG CH-8340 Hinwil/Switzerland Tel. +41 44 943 63 00 swan@swan.ch . www.swan.ch Swansensor PHARMACON Data sheet No. DenA87335100 Two-electrode conductivity sensor for the inline measurement of purified water and water for injection of pharmaceutical water. Swansensor PHARMACON, SAN For high purity water applications in the pharmaceutical industry. With sanitary flange. Polished surface, no dead volume. Sensor will be accompanied with following certificates: cell constant, material specification and inspection certificate (according to EN 10204), surface roughness. Specifications: Recommended measuring range: Accuracy (at 25°C): > ± 2 % up to 500 S/cm ± 3% above 500 S/cm up to 1’000S/cm 0.1 cm-1 Cell constant: Material: Shaft & Electrode: Isolator: Roughness: SS 316L (1.4435), stainless steel PEEK Ra < 0.4 μm Temperature sensor: Sensor mounting: Operating temperature: Sterilisation temperature: Operating pressure: Length totally: Insertion length: Sensor is equipped with fixed cable (~30cm, PTFE) and an M16 male plug. Order scheme Accessories: A-88.155.X20 Cable with M16 connector and end sleeves, available in lengths of 1 m, 5 m, 15 m or 25 m C-87.329.010 Clamp for sanitary flange (max. 6 bar) incl. welding nipple C-87.329.011 Sealing made of PTFE for sanitary flange 02/2022 subject to change without notice