CSR - PRODUCT OVERVIEW
20Pages

Product Overview

Straight Neck Surgical cover screw - included Surgical cover screw - included DAT-N connection For further information on the use of the implants please refer to the surgical manual MC-IMP-CSR-E. Surgical cover screw - included DAT connection Reverse unscrewing cover screw for all CSR implants Reverse unscrewing cover screw - not included Reverse unscrewing cover screw - not included DAT-N connection These screws must be removed with: RIM-20-EX.

Connection details DAT-N CONNECTION Connection diameter: Connection diameter: PROSTHESIS WITH CONICAL SCREW DAT regular profile small profile small profile regular profile PROSTHESIS WITH SCREW Q120 - WITH SUPPORT AT 120° small profile regular profile small profile regular profile Important warning It is recommended not to use the standard connection screw with 120° support with the standard prosthetics components CSR-DAT, that require the conical screw. The correct screws are always included in the packages. 3

Surgical kits CSR surgical kit complete surgical grommetless kit, for the instruments necessary for CSR implants surgical kit for CSR RF SL implants insertion radel tray for instruments for CSR implants radel tray for instruments for CSR RF SL implants Single surgical kit for all CSR and CSR RF SL implants surgical kit for the insertion of CSR and CSR RF SL. The kit is the combination of the basic kit (ZCSR-INT) and the kit for the insertion of CSR RF SL implants (ZCSRRF-INT). Includes three additional countersink drills (CSR-FC-350ST, CSR-FC-380ST, CSR-FC-420RN) not included in the basic...

Precision drill Precision drill kit Pilot and intermediate drills and related stops pilot drill intermediate drill kit Final drills and related stops For further information please refer to the surgical manual MC-IMP-CSR-E.

HSM-20-EX with hexagonal connector, short HSML-20-EX with hexagonal connector, long HSMXL-20-EX with hexagonal connector, extra-long HSM-20-CA with right angle shank Ratchet recommended for prosthetic use connessione DAT-N ■ EASY4-EX200-EX with hexagonal connector yf yf EASY4-EX230-EX with hexagonal connector extension for instruments with hexagonal connector extension for surgical drills screwdriver for right angle instruments with hexagonal connector for ratchet, digital adaptor for right angle instruments PAD-VTRAL-140-MAN P.A.D. transfer screw for manual screwing adaptor for torque...

Optional screwdrivers HSMXL-20-EX AVV2-ABUT with hexagonal connector, extra-long for straight PA.D. abutments HSMXS-20-CA with right angle shank, extra short instrument for the maintaining of the titanium cap for ball attachments BASCC-EX with hexagonal connector, for ball attachments DSPDCLH-24 dedicated driver for Talladium screw DAT-N and DAT connection dedicated driver for Talladium screw DAT-N and DAT connection B-AVV-CA3 mechanical adapter for instruments with hexagonal connector Parallelism pins with depth laser marking, small Depth gauge Cover screw removal tool RIM-20-EX Drivers to...

Straight profile Standard profile Wide profile Xwide profile Healing abutments DAT-N connection transgingival h Straight profile DAT connection Straight profile * Healing abutment for VSR-MDPF-N and VSR-MDPFposts. If used before posts with higher transgingival height, please note that the overall compression will be greater. Wide profile transgingival h Xwide profile Tissue conditioner DAT-N: screw VSR-VTRA-160-08 included. | DAT:screw VSR-VTRA-180-08 included. 8 For further information please refer to the prosthetic manual MP-IMP-CSR-E.

Pick-up transfer DAT-N connection DAT connection Temporary posts - 120° screw head stop emergency h DAT-N connection DAT-N: screw VSR-VM-160-L included. | DAT:screw VM-180-L included.

Straight pre-made posts with conical screw DAT Straight pre-made posts for direct screwing - non engaging DAT-N connection DAT connection Straight pre-made posts for direct screwing - engaging emergency h DAT-N connection DAT connection VSR-MDPF-N VSR-MDPF small profile VSR-MD-N-H4T2 VSR-MD-H4T2VSR-MD-N-H4T4 VSR-MD-H4T4 H3 = 3.00 mm Note: H indicates the height of the transgingival emergence, with T the height of the anatomical profile. In the example, only the height H3 of 3.00 mm and the height T2 of 2.00 mm are highlighted. DAT-N: scre w VSR-VM-N-160 included. | DAT: scre w VSR-VM-180...

Preparable posts - engaging Preparable posts - engaging DAT-N connection DAT-N connection DAT connection VSR-MFP-N VSR-MFP regular profile VSR-MF-N-T2 VSR-MF-T2 DAT-N: screw VSR-VM-N-160 included. | DAT: screw VSR-VM-180 included. regular profile Millable posts with 120° screw head stop ^ Millable posts - 120° screw head stop DAT-N connection DAT connection VSR-MF-N-F-T2 DAT-N: screw VSR-VM-N-160-L included. | DAT: screw VSR-VM-180-L included. Castable posts with a metal base - engaging Castable posts with a metal base - non engaging DAT-N connection DAT connection VSR-UCRCO-S small profile...

P.A.D. abutments (Disparallel Screwed Prosthesis) Straight P.A.D. abutments emergency h DAT-N connection emergency h DAT-N connection DAT-N: scre w VSR-VM-N-160 included. | DAT: sore w VSR-VM-180 included. DAT-N: screw VSR-VM-N-160 included. I DAT: screw VSR-VM-180 included. P.A.D. components for overstructures Protection caps unique platform Bone profilers unique platform flare type Impression and model phase Castable abutments with a metal base unique platform in PMMA with base in cobalt chrome, non engaging pick-up transfers in Gr. 5 titanium, non engaging pick-up transfers in Gr. 5...

Abutment P.A.D.r (Disparallel Screw Retained Prosthesis) Angled PA.D.r abutments Straight P.A.D.r abutments emerg. h DAT-N connection DAT connection emerg. h connessione DAT-N connessione DAT DAT-N: VSR-PADR-VM-N-160-Fscrew included. | DAT: VSR-PADR-VM-180-Fscrew included. PADR-VTRAL-140-M transfer screw included. DAT-N: VSR-PADR-VM-N-160-Fscrew included. | DAT: VSR-PADR-VM-180-Fscrew included. PADR-VTRAL-140-M transfer screw included. P.A.D.r components for overstructures Protection caps PAD-VP-140 screw included with PADR-CG. | PAD-VCGP-140 screw included with PADR-CGP. Impression phase...