P-SLIM
12Pages

P-SLIM Product overview

Intramucosal, the evolution of transgingival that transforms limits into opportunities P-Slim is the new solution with narrow diameter for thin crests, and for all those anathomical situations where a strong yet small implant is required, such as upper lateral incisors and the lower intraforaminal area. It can also be a trustable support for fixed multiple rehabilitations whether screw-retained, cemented or conical. It can also be used in overdentures, combined with multi-unit abutments, Locator abutments or ball attachments. Surfaces P-Slim implants are available with a ZirTi endosseous...

Thanks to UTM surface, the neck can adapt to the irregularities of the bone crest or of a post-extraction site, where the two different neck heights can offer the best support for hard and soft tissues. Short Neck Regular Neck P-Slim is the smaller diameter with Collex One connection, so it utilizes the same prosthesis of Prama W and Premium One.

Clinical case Courtesy of dr. Andrea Di Domenico, Cava de’ Tirreni (SA) With P-Slim even surgery in very thin ridges is simpler and safer thanks to a constant diameter of 3.30 mm along the entire implant length. The presence of ZirTi treated portion allows you to make the most of the scarce amount of bone available and the UTM neck (which in the P-Slim implant is available in both 1.80 mm and 2.80 mm lengths) maintains the cylindrical geometry of the implant and exploits the benefits that its particular micro-threaded surface brings both in contact with the bone and with soft tissues. 1....

P-Slim implant as replacement of a maxillary premolar Courtesy of dr. Guillermo Cabanes Gumbau In this clinical case, the use of the P-Slim implant is presented for the replacement of the upper left first premolar. P-Slim is useful to rehabilitate the small edentulous spaces due to long term premolar absence, which have generated small interproximal empty areas due to the progressive mesialization of the remaining posterior teeth. In these cases, a therapeutic option is slightly increasing the small edentulous space by gently grinding and parallelizing the interproximal surfaces of the...

Both versions of P-Slim are intramucosal implants. AH implants are coded as per their nominal length, which expresses the endosseous length of the implant, but it doesn’t include the 1.80 or 2.80 mm intramucosal necks. For this reason, the total length is 1.80 or 2.80 mm greater than the nominal one: for example a 10.00 mm implant with a 1.80 mm neck is 11.80 mm in total. Please see the comparison below between Premium 3.30 mm, which is a bone level implant, and P-Slim to understand better how the nominal length is calculated for intramucosal implants. P-Slim Short Neck P-Slim Regular...

Drilling sequence for P-Slim implants The preparation of the implant site is not affected from the length of the chosen neck, because it is based on the length of the ZirTi portion. The following surgical sequences for each diameter refer to D1 bone using the drills with adequate irrigation. The recommended speed is: 900-1.100 rpm for cylindrical drills, 20 rpm for bone taps. The state of wear of the drills must be regularly checked so as to replace them when they lost their cutting capacity, in any case after 20 work cycles. In the case of less dense bone, the clinician’s experience can...

Temporary abutments PEEK temporary abutments with titanium base SIMPLE titanium temporary abutments Straight healing abutments transgingival height Fixation screw VM2-180 included. 8 For further information please consult the prosthetic manual MP-IMP-PRAMAW-USA.

P.A.D. abutment (Disparallel Screwed Prosthesis) Fixation screw VM2-180 included.

Fixation screw PAD-VP-140 included. for laboratory and intraoral use, in titanium T-Connect with different transgingival height Fixation screw PAD-VP-140 included. transgingival height cone height Premilled posts Titanium premilled post (laying on the implant platform) VM2-180 fixation screw included. Fixation screw VM2-180 included. Chairside T-Connect supports cone height Fixation screw VM2-180 included. Standard fixation screws VM2-180 VM2-180-10 10 pcs packaging Conical support fixation screws L-VMS-180 L-VMS-180-10 10 pcs packaging for PA.D. abutments 10 pcs packaging for Pick-up...

transgingival height Locator Accessories and spare parts for Locator abutments 8505 4 aluminium transfers, 4 retainers cod. 8515 included 8517 4 parallelism pins in nylon steel plate AISI 316 L Locator Core Tool 8393 complete Locator Core Tool steel push rod for inserting the retainers in the caps steel driver for abutment screwing/ unscrewing Caps for ball attachments retention jacket for the driver, to transfer the Locator abutments into the oral cavity Accessories and spare parts for Locator abutments 8515 low retention capacity for impression taking, black, in polyethylene, 4 pcs...

Sweden & Martina S.p.A. Via Veneto, 10 35020 Due Carrare (PD), Italy Authorized Distributor Sweden & Martina Inc. 4700 S Mill Ave, Ste B-16 PO Box 23748 - Tempe, AZ 85282 Toll free 1-844-8MARTINA (1-844-862-7846) info.us@sweden-martina.com www.sweden-martinainc.com The implants, standard prosthetic components and surgical instruments contained in this dépliant are Medical devices and are manufactured by Sweden & Martina S.p.A. They are conform to the ISO 9001 and ISO 13485 standards and are certified with the CE Mark (Class I), CE 0051 (Class Ir) and CE 0476 mark (Class IIA and class IIB)...