Instructions for use RAY Knee Holder for High Tibial Osteotomy Training Optional set up to RAY Knee Holder System for High Tibial Osteotomy (HTO ) Training The RAY Knee Holder System can optionally also be used for HTO training 0027.30 RAY Knee Holder adapter set for HTO training LD1175 Tibia malformation notch with Fibula with mounted adapter set 0027.30 LD1173 Tibia malformation notch with mounted adapter set 0027.30 Remove the standard notch holders from the brackets Insert the second HTO adapter into the hole of the tibia bone model Insert the HTO adapter to the bracket of the guiding rail and tighten the locking lever with slight pressure Insert the HTO adapter to the bracket of the supporting column and tighten the locking lever with slight pressure The RAY Knee Holder can now be used for HTO training Insert the first HTO adapter into the notch of the tibia bone model High Tibial Osteotomy (HTO) Training SYNBONE AG Tardisstrasse 199 7205 Zizers · Switzerland Phone +41 81 300 02 80 [email protected] www.synbone.com Visualisation of open wedge technique training with RAY Knee Holder System SYNBONE SDN BHD No. 40 - 41, Jalan i-Park 1/3 81000 Bandar Indahpura Kulai, Johor · Malaysia Phone +60 766 082 20 [email protected] www.synbone.com Visualisation of open wedge technique training with RAY Knee Holder System 1