Spine Specialty Models
7Pages

Intact model Used for micro-decompression/micro-discectomy exercise. Delivered with additional cancellous bone better education outcome Special Spine Models As a full service provider, SYNBONE offers selection of special spine models. Lumbar Spine for Spinal Decompression This lumbar spine model has been developed for spinal decompression training. The surgeon will enter the spine by removing the membrane of the flava ligament. After that, the nerve root will be moved to the side so that the herniated portion of the disc material can be removed to release pressure for healing. This model comes with large spine section from L3 to Sacrum with nerves and flava ligament. LDPR1535 Spine Ig lumbar Description Lumbar Spine section from L3 to Fracture Sacrum with nerves and flava ligament Dimensions Overall length: 235 mm Remarks Materia| Solid foam: low density, Disk: soft flexible foam, Nerves: rubber Lumbar Spine for Sacral-Alar-Iliac-Fixation This lumbar spine model has been developed for specifically for the Sacral-Alar-Iliac technique for sacropelvic fixation. This model comes with large lumbar spine section from L1 to sacrum and hemi-iliac. Features of LDPR1534 Spine lg Lumbar L1-L5 hemi Iliac: - A large-size model meaning a more anatomically detailed model - The low-density (LD) cortical bone mixture allows screws to be inserted with much less force - Better surface around the pedicle for the placement of pedicle screw - Large vertebra surface in the lumbar area for easy tool access - Features lumbar spine L1-Sacrum for lumbosacral fixation - Features hemi-iliac to facilitate sacro-pelvic fixation with screws LDPR1534 Spine Ig Lumbar L1-L5 hemi Iliac Intact model Model used for sacral-alar-iliac technique for sacro-pelvic fixation Description Large lumbar Spine section from Fracture L1 to Sacrum and hemi Iliac Dimensions Overall length: 330 mm Remarks Material Solid foam: low density, Disk: soft flexible foam, Hemi-Iliac: solid foam details make the difference SYNBONE SDN BHD • No. 40-41, Jalan i-Park 1/3 • 8100 Bandar • Indahpura • Kulai, Johor • Malaysia Phone +60 766 082 20 • Fax +41 81 300 02 89 • sales@synbone.com • www.synbone.com

PRODUCT DETAILS SYN50NE"better education outcome Lumbar Spine Models for Kyphoplasty or Vertebroplasty These series of spine models have been developed for Kyphoplasty or Vertebroplasty surgery training. They feature an open cell foam inlay surrounded by low dense cortical bone. These specific vertebrae are only to be found on the spine section T10-L5. The models can be used to simulate vertebral augmentation whereby a small incision is made on the bone and a narrow tube is inserted, creating a path to the specific vertebrae/fracture through the pedicle area. The metallic coating on the...

PRODUCT DETAILS SYN50NE"better education outcome Lumbar Spine section from T10-L5 and Fracture Intact model Sacrum with white metallic coating. Sacrum: solid foam low density Vertebrae T10-L5: Cortical low density / open cell cancellous bone. Disk: soft flexible foam Used for vertebral augmentation cement application / Radiopaque used for C-scans In addition, we can support you with two single vertebrae for your cement augmentation demonstration. PR0830 Vertebra Description Large lumbar vertebra with pre-drilled pedicular canal, filled with open cell foam and covered with a...

PRODUCT DETAILS better education outcome Spine model for Scoliosis Thanks to the integrated bending rod, you can create your own scoliosis. Multiple and repeatable bending in different segments and soft rotation are possible. LD9315.7 Spine lg C1-L5 Sacrum flex rod Description Entire Large Spine from C1 to Sacrum with vertebral arteries and bending rod Dimensions Overall length: 780 mm Material Solid foam: low density, Disk: soft foam, LD9305.7 Spine Ig Occiput Pelvis flex rod Intact model Remarks Used for demonstration of scoliosis syndrome and allows repeatable reduction of...

PRODUCT DETAILS SYN50NE"better education outcome Fractured models In addition to the existing fractured models, here are two new models featuring a wedge fracture: Description Large thoraco lumbar Spine section from T9 to L4 fractured Dimensions Overall length: 273mm Material Solid foam low density. Disk: soft flexible foam Fracture Wedge fracture L1 Remarks Intervertebral disk defect T12/L1 Description Large lumbar Spine section from T10 to Sacrum fractured Dimensions Overall length: 417 mm Material Solid foam low density. Disk: soft flexible foam...

PRODUCT DETAILS SYN50NE"better education outcome Spine Model with Dura Mater and spinal cord For advanced training SYNBONE has created cervical and lumbar models with transparent dura mater and yellow spinal cord. When the dura mater is accidentally injured, a liquid leaks out to make the injury visible. The dura mater can then be sutured. This enables to sensitize the participant in the workshop to the complexity of such surgeries. LD9379.8 Spine Ig lumbar L1-L5 Sacrum Description Large lumbar Spine section from L1 to Fracture Intact model Sacrum with transparent dura mater and...

PRODUCT DETAILS SYN50NE"better education outcome LD9399.8 Spine Ig cervical C1-C7 Description Large cervical Spine section from C1 to C7 with transparent dura mater and yellow spinal cord Dimensions Overall length: 152mm Material Solid foam Low Density. Disk: soft flexible foam Dura: PE Cord: gelling agents Fracture Intact model Remarks Spine Dura storage life is 6 months from production date All SYNBONE Spine models have the following technical advantages: Detailed and realistic anatomy Better surface around the pedicle for the placement of pedicle screw Thanks to the low dense...