XN-3000 * Fully integrated slide maker & stainer * For labs with steady, medium workload and relatively high smear rate * Choose diagnostic APPs as needed * Integrated backup concept * Short turnaround times XN-3000 - superb diagnostics and performance The XN-3000 configuration includes two XN analysis modules and a high-quality, fully-integrated slide maker and stainer module, our SP-10 unit. This offers great productivity while taking up minimal space. The XN-3000 also has the excellent Extended information-processing unit (IPU) on board as standard that can intelligently route and control your sample and data workflow. If you have a medium-sized lab with a fair smear rate, you will appreciate the detail in the XN-3000 setup. Because the two analysis modules process rack samples simultaneously, it can accommodate any sample without slowing down – the modules work together perfectly. And you don’t lose any precious time, even with abnormal samples. The XN-3000 has a single point of entry and a single point of exit. Reflex testing occurs within the same loop, and before samples pass the SP-10 module. Sample racks are then sent to the SP-10 module where the samples needing a smear are removed. Like extended measurements, smears are only initiated if they offer additional diagnostic value. The analysis profile is extended automatically to include smear-making and staining, but you may also order this up front, for instance with known special samples. XN-Series specifications Technology Fluorescence Flow Cytometry in all modes Aspiration volume 88µL in all modes Throughput starting from 100 samples/h Quality control XN Check and XN Check BF Parameters 28 diagnostic parameter always standard XN-CBC = always with NRBC XN-DIFF = efficiency of XE-5000 16 diagnostic parameters are optional Core models XN-1000, XN-2000, XN-3000 or XN-9000 Design and specifications may be subject to change due to further product development. Sysmex Europe GmbH, Bornbarch 1, 22848 Norderstedt, Germany, Phone: +49 (40) 527 26 0, Fax: +49 (40) 527 26 100 www.sysmex-europe.com

Design and specifications may be subject to change due to further product development. Sysmex Europe GmbH, Bornbarch 1, 22848 Norderstedt, Germany, Phone: +49 (40) 527 26 0, Fax: +49 (40) 527 26 100 www.sysmex-europe.com