Systec Product catalogue
11Pages

THE POWER OF INNOVATION. Sterilizing in the laboratory. Easier, faster and safer with Systec. Program overview ISO 9001 ISO14001 Subsidiary Switzerland: Systec Schweiz GmbH Gewerbestrasse 8 CH-6330 Cham, Switzerland T +41 41 781 52 80 F +41 41 781 52 79 info@systec-lab.ch www.systec-lab.ch Subsidiary China: Systec (Shanghai) trading Co., Ltd C1-206, No.6000 Shenzhuan Rd, Songjiang 201619 Shanghai, China T +86 21 6019 0256 info@systec-lab.com.cn www.systec-lab.com.cn Scan to visit our website: Rights reserved to change technical aspects as required. Illustrations similar. · 03/2021

Systec Laboratory autoclaves For your sterilization tasks. Made-to-measure for any laboratory application. Easier, precise, more reproducible and validatable. Modular designed autoclaves. Additional services: ■ Installation and start-up ■ Special technical developments ■ Tests and process development ■ Individual service on-call ■ Contract service ■ Qualification and validation ■ GMP-compliant documentation Our aim is always to make steam sterilization in the laboratory safer, easier and more precise, reproducible and validatable. With over 25 years experience and constant cooperation with...

Systec Systec FOR BETTER STERILIZATION. Vertical floor-standing autoclaves Systec V-Series Highest requirements with regard to safe, accurate, reproducible and validatable sterilization processes Sterilization temperatures up to 140 °C, steam pressure up to 4 bar absolute pressure (optional 150 °C/5 bar absolute pressure for Systec VX/VE, 65 to 150 liters) Fully automatic, micro-processor controlled Up to 25 sterilization programs for different sterilization applications Systec V-Series 8 sizes, 40 to 150 liters chamber capacity model ranges with different 3 VX VE VB performance...

Systec Systec FOR BETTER STERILIZATION. Horizontal bench-top autoclaves Systec D-Series Highest requirements with regard to safe, accurate, reproducible and validatable sterilization processes Sterilization temperatures up to 140 °C, steam pressure up to 4 bar absolute pressure (optional 150 °C/5 bar absolute pressure for Systec DX/DE, 65 to 150 liters) Fully automatic, micro-processor controlled Up to 25 sterilization programs for different sterilization applications, self-programmable Systec D-Series 6 sizes, 45 to 200 liters chamber capacity 3 model ranges with different DE DB DX...

Systec Systec Shorter and more efficient process times Thanks to the completely newly developed control of the autoclaves. Horizontal floor-standing autoclaves Systec H-Series Highest requirements with regard to safe, accurate, reproducible and validatable sterilization processes Sterilization temperatures up to 140 °C, steam pressure up to 4 bar absolute pressure (optional up to 150 °C/5 bar absolute pressure) Fully automatic, micro-processor controlled Internal memory capacity for storing up to 10 years of data backups Up to 100 sterilization programs for different sterilization...

Systec Systec Shorter and more efficient process times Thanks to the completely newly developed control of the autoclaves. Horizontal pass-through autoclaves Systec H-Series 2D Highest requirements with regard to safe, accurate, reproducible and validatable sterilization processes For gas-tight installation in partition walls of biological safety laboratories or clean rooms Sterilization temperatures up to 140 °C, steam pressure up to 4 bar absolute pressure (optional up to 150 °C/5 bar absolute pressure) Fully automatic, micro-processor controlled Internal memory capacity for storing up to...

Systec Systec The actual sterilization time of e.g. 15 to 20 minutes at 121 °C is only a fraction of the total time involved for an autoclave procedure. Especially in the case of sterilizing liquids, the heating up and cooling down phases are considerably longer. The cooling process for liquids is also very slow; this is because, without active rapid cooling, the heat can only be reduced to below 100 °C by dissipating the heat via the chamber insulation by radiation. The conventional procedure In previously used conventional systems, even if the intended sterilization temperature has been...

Systec Systec Additional options STERILIZATION OF SOLIDS AND WASTE IN DISPOSAL BAGS. QUICK-COOLING OPTIONS FOR STERILIZATION OF LIQUIDS. VX Water Cooling with support pressure provide a coil wrapped around the outside of the sterilization vessel. During the cooling phase, cool water circulates through the coils, reducing cool down time. Support pressure prevents liquids from boiling over during the cooling process, eliminating evaporative loss of sterilized liquids. Reduction of cooling time up to 60 %. Systec D-Series/H-Series Systec V-Series Radial ventilator for air circulation and...

Systec Systec FOR BETTER MEDIA PREPARATION AND STERILIZATION. Media preparators Systec Mediaprep Gentle preparation, rapid cooling Continuous mixing Sterilization temperature up to 136 °C Steam pressure up to 3,5 bar absolute pressure Systec Mediaprep 7 sizes, 10 to 120 liters chamber capacity 7 models 10 to 120 l chamber capacity

Systec Systec FOR AUTOMATED POURING AND STACKING OF CULTURE MEDIA. Plate pourer and tube filler Systec Mediafill For precise, automated and unattended pouring of culture media into Petri dishes, bi-plates, tri-plates and test tubes Touch display for easy and intuitive programming Even surfaces, no holes or gaps, easy to clean Three stacker carousel heights for up to 220, 440 and 660 Petri dishes

THE POWER OF INNOVATION. Sterilizing in the laboratory. Easier, faster and safer with Systec. Program overview ISO 9001 ISO14001 Subsidiary Switzerland: Systec Schweiz GmbH Gewerbestrasse 8 CH-6330 Cham, Switzerland T +41 41 781 52 80 F +41 41 781 52 79 info@systec-lab.ch www.systec-lab.ch Subsidiary China: Systec (Shanghai) trading Co., Ltd D1-201, No.6000 Shenzhuan Rd, Songjiang 201619 Shanghai, China T +86 21 6019 0256 info@systec-lab.com.cn www.systec-lab.com.cn Scan to visit our website: Rights reserved to change technical aspects as required. Illustrations similar. · 03/2021