ST-50
2Pages

Smart Table Minimum height Maximum height Switchable in 5 steps (2.5 sec., 3.0 sec., 3.5 sec., 4.0 sec., and 4.5 sec. from swiping in and out the touch sensitive part until the slide stops) Allowable load Power supply for slit lamp The previous sliding table contained the slide mechanism in the underside of the table, by adopting a new slide mechanism design and removing the slide mechanism from the table top, all mechanical parts on the underside of the table are now discreetly enclosed and protected by the back plate. This eliminates any concerns such as patients accidentally touching the mechanical parts or their clothes becoming contaminated with oil. 30kg Slit lamp installation kits for various manufacturers are available. Contact our sales department for full details. AC100V - 230V 50-60Hz Power consumption Auxiliary electrical outlets 103 kg (including balancing weights exclusive of options) The table top is now 40% thinner than the previous model, accommodating all patient heights sufficiently with the increased space below the table top. It is now more convenient to use a slit lamp for patients with curved backs and children with an eye height of only 540 mm from the seat surface, when used in conjunction with Takagi 700GL, 30GL, 4ZL, and 2ZL slit lamps. The minimum height of the new motorized patient chair CR-750S is 400 mm, 30 mm lower than the previous model. By combining ST-50 and CR-750S, tall patients can be examined easily by lowering the seat position, without hitting their folded knees to the underside of the table. The large space below the table top allows patients in wheelchairs to be examined quickly and comfortably. Sliding Mechanisms Intuitive Table Slide Automatic sliding Manual sliding The motorized table slides by swiping the touch sensitive part where the blue light flashes, sensing the direction of the finger movement. Intuitive operation is now possible by swiping in and out for the required table direction, achieving ease of use and safety. Customizable Table Sliding Speed Table sliding speed can be fully customized with five speed settings, 2.5, 3.0, 3.5, 4.0, or 4.5 seconds, according to the Doctors desired preference. Freedom to Use Automatic or Manual Sliding Automatic or manual sliding function can be used as required, e.g. simply slide the table out using manual mode then slide back using automatic mode, if the user feels more comfortable doing so due to a patient’s condition. Slide speed Slide stroke Slide Mechanism Removed to Reduce Table Top ● Design and specifications are subject to change as improvements are made to the product. 330-2 IWAFUNE, NAKANO-SHI, NAGANO-KEN, 383-8585, JAPAN TEL.+81-269-22-4512 FAX.+81-269-26-6321 URL:http://www.takagi-j.com E-mail:info@takagi-j.com B17003 Rev.0 Printed in Japan 2018.01 KY

Smart Table ST-50 The Quintessential Slit Lamp Table Elevation Safety Switch Minimized Cable Exposure The plate section which covers the complete under side of the table is now the touch sensitive elevation safety switch, enhancing safety remarkably. When something touches the plate such as a patient’s legs, the buzzer beeps and the switch panel turns red to alert the operator. With safety and aesthetics in mind, a power cable and video camera cable can be stored inside the cable access cover, minimizing external cable exposure. Slide Safety Switch The slide stop switch on the table top can...