Precision and technology under control Your Braiding Industry

Sutures 17/120 RFR Continuous round and flat braid. The 17-120 RFR braider is designed for the manufacture of special products consisting of round braid and flat braid sections, in a continuous manner. The transitions between both types of braiding are smooth, with no splicing of any kind. 17/120 RFR • Number of carriers: 17 • Gauge: 120 • Total motor power: 400 W x 4 , 100 W x 3 • Maximum horngear speed: 100 rpm • Bobbin capacity: 96,847 cm3 • Bobbin diameter: Ø39 x 110 mm • Length (A): 1025 mm • Width (B): 735 mm • Height (C): 1750 mm • Weig

These are the first generation of Ratera machines to be fitted with servomotors for driving the horngears. This allows the precise and synchronized movements required for this type of braiding. Includes module that can be connected to your company’s Ethernet. This can be used, if necessary, to add such utilities as software updates and remote monitoring of the machine’s status. The touch screen is used to set all of the parameters required to produce braids. Stitches, length and speed can be set for production of each round or flat section. These parameters can be saved as programmed tasks. The...

Technical Features Total motor power Maximum horngears speed Bobbin capacity Bobbin diameter NOTE: According to machinery directive 89/392 about safety for the European market, machines must be protected. However, in order to allow for a better display some of this catalog’s illustrations have been made without the mandatory protections. The company reserves the right to modify and improve the characteristiques of its products without notice. Braiding Machinery Solutions since 1942 Talleres Ratera SA Av. dels Dolors, 13 · Apt. Correos (PO Box) 228 08243 Manresa · Barcelona · Spain Tel. +34 93...