Case study No 3

Product catalog summary

Case Overview: Dr. Frank Lasry conducted a dental procedure involving immediate loading after extraction and implantation for Mrs. D B in Paris, France. The procedure focused on the central right tooth replacement.

Procedure Details:

Tooth Extraction and Implantation: Tooth #21 was extracted, and a dental implant was placed. Due to buccal bone loss, the implant was inserted deeply.
Abutment Selection: The axis during drilling was crucial for choosing the appropriate abutment. A zirconium abutment was used to facilitate gingival connections.
Implant and Abutment Placement: A TAV dental 15° 2mm high abutment was screwed into position with a torque of 32 Ncm.
Temporary Crown Preparation: Temporary cement was used in the screw access to allow for the creation of an acrylic temporary crown. The patient's own tooth was relined for this purpose.
Margin and Finishing: The margin with the abutment was completed using composite, which is easy to polish or glaze.

Post-Procedure Observations:

Stitches and Cement: Stitches were left loose, and no cement was used, allowing for better papilla gain.
Occlusal-Palatal View: The loose stitches contributed to improved papilla formation.

Catalog excerpts

PRECISION. PASSION. PARTNERSHIP Immediate loading after extraction Dr. Frank Lasry, private practice, Paris, france Central right replaced

Open the catalog to page 1

Tooth #21 extracted, Dental Implant in place • Dealing with axis as we drill is important for the choice of the abutment FL 06/2011

Open the catalog to page 2

Implant deep in place • Due to buccal bone loss, implant is very deeply inserted. Zirconium abutment is good to let connections from gingiva FL 06/2011

Open the catalog to page 3