FILTER / EXTRACTION / ENVIRONMENTAL - // TECHNOLOGY TRIPLE PROTECTION FOR // PEOPLE / ENVIRONMENT / MACHINERY

Long service life through effective filter cleaning Figure 1: New filter cartridge Figure 2: Filter cartridge in use Figure 3: Filter cartridge after cleaning with compressed air The FP211 and FP213 are equipped with six cleanable filter cartridges of dust class M. The filter cartridges are made of BGIA (USGC) tested filter material, which allows an optimized filter cleaning due to its special folding. Depending on the application, specially coated variants can be used. Please contact the TBH sales department. Patented technology and contamination-free filter change Filter cartridge cleaning...

Filter cleaning control TheFP200 seriesseries are equipped with a specialized filter cleaning control system that automatically clears the filter cartridge of accumulated dust, significantly extending their service life. The customer can parameterize various options depending on the application: Differential pressure-controlled cleaning (factory setting) The system constantly measures the current filter saturation and automatically starts the cleaning cycle when a set value is reached (factory setting: 75% saturated filter). Interval filter cleaning (parameterizable via the interface) The system...

Application-dependent motor selection The TBH product range offers a selection of different motor concepts to ensure that the extraction and filter system is optimally suited to the specific application. This makes it possible to optimally adapt the design of the system to the conditions prevailing on site, for example: short or long extraction lines large or small line cross-sections coarse or fine particles single or multi-station extraction noise-sensitive environment industrial production hall High adsorption energy • • Adsorption of gaseous substances with activated carbon granulate (physical...

Intuitive operation Always full control over the system Start/Stop button Manual speed rotation regulation Manual start of filter cleaning Saturated filter notification System status indicator Operating hours counter indicator Temperature and turbine status indicator Filter cleaning in progress indicator + filter status indicator Interface External control of the system Powerful control electronics Switch Start/Stop “Filter full” early warning level (75 %) Collective error output (rotation speed, temperature, “filter full” 100%) External speed control Parameterization access for activating special...

Applications Laser Technology Laser use in material processing—such as marking, engraving, cutting, or welding—releases ultrafine particles in the micrometer and nanometer range. Efficient extraction and filter systems are essential to ensure occupational safety. Dry Dusts in Metalworking Dry dust is generated in many industrial processes. In metalworking, chips and particles are produced that must be extracted and filtered to protect employees and keep the work area clean. TBH extraction and filter systems are ideally suited for this purpose, offering various designs and filter configurations....

For the easy configuration of your desired TBH extraction and filter system, type FP211 or FP213, please follow these steps: Depending on the application, select the suitable system based on its performance data. Select the appropriate filter cartridges for your system depending on the application. For any questions, please contact the TBH sales department. Depending on the application, select additional filter stages for your system (Fig. 3). Depending on the application, a filter case module with a particle filter and/or a filter case module with an activated carbon filter can be selected....

D - Selection of intake socket Select the intake nozzles for your system (position and diameter) (see figure). Please note any existing connections, e.g. to laser systems or similar. Please also pay attention to a reasonable dimensioning of the line cross-sections for your application (air velocity, pressure loss). E - Selection of filter cleaning The system is factory-equipped with the “differential pressure-controlled filter cleaning” function. When the filter saturation reaches the set value, the system automatically starts its filter cleaning cycle. The cleaning modes, interval cleaning and...

• fully assembled (incl. the selected filter equipment) • Pallet feet (suitable for forklift trucks) • Lifting brackets (optional) • Power connection + interface (Harting)

Ordering data FP211 STANDARD MODEL WITH INTERMEDIATE MODULES DESIGNATION ART. NO.FILTER EQUIPMENT ART. NO. FP211380-480V (3P+PE) Filter case module particle filter * indicates position only ** Coupling dimension Filter case module Activated carbon filter1 REPLACEMENT FILTER Particle filter 2 x Activated carbon filter reduces the extraction capacity of the system by approx. 20% - alternatively, an additional filter module can be connected downstream of the system so that the capacity is not negatively affected (see "Activated carbon separator” accessory). Necessary for manual precoating or automated...

Ordering data FP 213 STANDARD MODEL reduces the extraction capacity of the system by approx. 20% - alternatively, an additional filter module can be connected downstream of the system so that the capacity is not negatively affected (see "Activated carbon separator” accessory). Necessary for manual precoating or automated production lines. The filter is cleaned manually using the button on the front foil or the interface/customer PLC. Further cleaning modes can be parameterized via the interface.

Notification, e.g., for controlling the cleaning process externally in conjunction with automatic cleaning

ACCESSORIESCABLE REMOTE CONTROL APPLICATION • "Filter full” notification • Start/Stop button • Rotation speed control • Switch-on status of the system: Standby operation DELIVERY SCOPE:Remote control (incl. cable) Reduction of the system performance by approx. 10- 20%