Zirconia collar implants - The way to comfort
1 / 2Pages

Clinical ^^Comfort ■ Anti-bacterial shield ■ Ideal for post-extraction ■ Immediate aesthetic result t| Frequently asked questionsClear and accurate answers. i 1 stage surgery i No healing screw i Visibility of the connection As a dental surgeon, you belong to a scientific community and you have the duty to deliver the best care. Curiosity and a critical mind are two qualities that you will be recognised for. Here are the answers to some of the most frequently asked questions. The Z1 is a tissue-level implant that requires only 1 surgery. Does it require specific knowledge ? No. If necessary, you will be able to benefit from clinical cases dedicated to the Z1 implant and also expert advice from our teams. Technological ^Comfort ■ Success rate of 98.6%* ■ Pure Titanium and Y-TZP Zirconia ■ Adapted to all prosthetic solutions Less chairtime Practice development Patient satisfaction As the Z1 implant combines two different materials, does that mean that it is more fragile? No. The pure titanium body and the zirconia collar constitute one single piece. It is impossible to disassemble the two materials. The Z1 successfully passed all the mecanical tests that are mandatory before marketing a medical device in Europe, in the USA and in more than 50 countries. Like all ceramics used in dentistry, zirconia is extremely resistant to compression and can support torques that are three times higher than the value needed to place an implant. As a reminder, a Z1 has to be inserted with a maximal torque of 45 N.cm. The Z1 has a collar height of 1.5mm: how can I deal with my patients' different gingival heights? Easily. 1.5 mm is an average gingival height, widely spread. In case of gingival height greater than 1.5 mm there is an aesthetic continuity between the ceramics of the implant collar and the final crown, to which the soft tissue adheres. In case of gingival height inferior to 1.5 mm, the zirconia collar can be slightly buried by using the countersink, specially designed for this purpose. Can the Z1 be used in both anterior and posterior cases? Yes, the diameters and lengths available for the Z1 are identical to those of the bone level implants. Except in particular anatomical situations, the Z1 can be placed in upper or lower jaws and in the molar or aesthetic areas. The Z1 is technologically more advanced: is it therefore more expensive? No, quite the contrary. Despite being a cutting-edge technology, the Z1 is more cost-effective on the short, medium and long term than a conventional bone level implant. Not only because of its technical features but also thanks to its ergonomy in use: time saving, less material needed, simplified maintenance, etc. Other questions More information? Contact us Try it and enjoy the comfort! implantsgroup ^ www.z1implants.co.uk The Z1 is a Class Ilb medical device protected by patent No. EP1418858 UNITED KINGDOM Q 0203 445 0996 EJ uk@tbrimplants.com HEADQUARTERS 1+33 5 62 16 71 00 | Iz1@tbrimplants.com

thanks to a well-proven technology [1] On a macroscopic scale the Z1 includes all the components required for the success of your implant surgery: biocompatibility, mechanical resistance, primary stability and longevity. On a microscopic scale, the surface condition of zirconia and pure titanium plays an essential role in the stabilization of soft tissues and in the perfect osseointegration. With an average success rate of 98.6%*, you can rely on the Z1 efficiency. An average success rate of 98.6%* [2] [1] SEM Picture - zirconia surface Y-TZP x6000 The Z1 system is universal and can suit...