NEURO LINE - Neuro 200 series Treadmill with harness Neuro 200 series Structure p p p p p p p p p p p p p p p Flexible floor Steel plate Moving wheels Stainless steel protective strips Control board with sensitive keys Access ramp Power supply 230 V / 50 Hz 20 A (curve D) Sound level (dB) : 40 to 70 Simple and friendly use Slope (%) : -3 to 17 Motor power (kW) : 2,2 Slow speed (km/h) : 0,1 to 10 Emergency stop system Weight (kg) : 450 Maximum user weight (kg) : 220 Electronics p Display : Speed (km/h), Slope (%), Distance (km), Time (min:sec), Consumed calories p Two self-braking lifting systems requiring minimal effort to manipulate, allow the patient to be lifted from his or her wheelchair p Load-lightening support measured on either side by two dynamometers, graduated in kilos up to 100 kg. p Support harness with adjustable buckles (different sizes are available) p Side fixings above each shoulder p Associated straps can hold up a patient weighting from 55 up to 150 kg and being from 1m30 up to 2m tall p Equipped with two additional separate control boards, accessible on either side p Ramp allowing patient access right into the middle of the treadmill with the wheelchair Models Medical, parallel handrails with adjustable height Medical, parallel handrails with adjustable width Passage's width for the wheelchair (cm) Options p Wide colour choice (180 shades) Standards p Machine in compliance with EC Standards p Directive 93/42/CEE (concerning the medical devices) p Standards : EN 60204/1 – EN 60601/1 – EN 61000/6/3 – EN 61000/6/1 Guarantee p 5 years guarantee* Commercial department RN 6, route de St Bris • BP4 • F - 89290 Champs-sur-Yonne • Phone + 33 (0) 386 53 83 81 • Fax + 33 (0) 386 53 80 42 • [email protected] • www.techmed-tm.com (*) See General Conditions of Sale – Non-contractual document – REF 2012-B