Catalogue - VENTURI TM

Product catalog summary

Main Technical Features:
The VENTURI TM Ejectors are active medical devices classified as Class IIa, compliant with EN ISO 10079-3: 2009 and EN ISO 7396-1: 2007 standards. They operate with an inlet pressure of 4 bar and provide a suction flow rate of 25 l/min at 650 mbar, with a maximum vacuum of 650 mbar ±10%. The devices are designed for limited gas consumption and feature a square, wide vacuum gauge for easy reading. Constructed with an anodized aluminum block, they ensure robustness and have a calibration that cannot be disturbed. Each unit has a serial number for identification and traceability.

Available Versions:
The ejectors are available for use with oxygen and medical air, with various inlet options and safety jar capacities (100 ml, 150 ml, and 500 ml). They can be connected to wall outlets via direct probes or rail mounting systems, compatible with standards such as AFNOR, BS, DIN, OHMEDA, NORDIC, and UNI.

Use, Cleaning, and Maintenance:
The VENTURI ejector should be adjusted in a closed circuit. Cleaning involves using water and soap, with compatibility checks for disinfectants. The silencer should be replaced annually, and the antibacterial filter of the safety jar should be changed after each patient. Safety jars are autoclavable up to 134°C.

Configurations and Accessories:
Various configurations are available, including different safety jar types and mounting systems. Accessories such as inlet adaptors, regulation knobs, vacuum gauges, and silencers are also available.

Contact Information:
For further configurations and inquiries, contact Technologie Médicale at their provided address and contact numbers.

Catalog excerpts

ACHAQUE PATIENT

Open the catalog to page 1

VENTURI EJECTORS RAIL MOUNTING SYSTEMS AFNOR rail mounting systems O2 BS rail mounting systems DIN rail mounting systems OHMEDA rail mounting systems NORDIC rail mounting systems UNI rail mounting systems Other standards available upon request.

Open the catalog to page 2

VENTURI EJECTORS DIRECT PROBES AFNOR direct probes O2 OHMEDA direct probes NORDIC direct probes UNI direct probes Other standards available upon request.

Open the catalog to page 3

VENTURI TM EJECTOR The VENTURI TM ejector is used to create, to adjust and to measure a suction from a source of pressured gas on the wall or from a cylinder (oxygen or medical air). It enables to suck in liquids or mucus in the absence of vacuum pipeline network. The VENTURI TM ejector should be connected either to a source of pressured gas on the wall, using a direct probe or a rail mounting system, or to a cylinder through a pressure regulator fitted with a quick-release connector. The VENTURI TM ejector should be associated with a collection jar and a suction hose. Main technical features:...

Open the catalog to page 4

• V01 • VENTURI TM ejector with 100 ml safety jar (antibacterial filter up-front) mounted with O2 AFNOR direct probe. • V02 • Ref. 11738: 150 ml safety jar with paper filter (in the cover). • V03 • Ref. 17664: 100 ml safety jar with plastic filter (up-front). • V04 • VENTURI TM with outlet tubing nipple mounted with medical Air DIN rail mounting system with polycarbonate universal rail clamp. VENTURI EJECTORS

Open the catalog to page 5

VENTURI EJECTORS AFNOR French Standard Ejector with 150 ml safety jar, paper filter Ejector with 100 ml safety jar, plastic filter up-front Ejector with outlet tubing nipple Ejector with 150 ml safety jar, paper filter Ejector with 100 ml safety jar, plastic filter up-front Ejector with outlet tubing nipple Ejector with 150 ml safety jar, paper filter Ejector with 100 ml safety jar, plastic filter up-front Ejector with outlet tubing nipple Ejector with 150 ml safety jar, paper filter Ejector with 100 ml safety jar, plastic filter up-front Ejector with outlet tubing nipple Mounted with AFNOR direct...

Open the catalog to page 6

Venturi Ejectors Ejector with 150 ml safety jar, paper filter Ejector with 100 ml safety jar, plastic filter up-front Ejector with outlet tubing nipple Mounted with DIN direct probe Ejector with 150 ml safety jar, paper filter Ejector with 100 ml safety jar, plastic filter up-front Ejector with outlet tubing nipple Ejector with 100 ml safety jar, plastic filter up-front Ejector with outlet tubing nipple Mounted with DIN complete Ejector with 150 ml safety jar, paper filter rail mounting system (polycarbonate clamp) Other standards and configurations available upon request. Complete regulation...

Open the catalog to page 7