Chiro Tools Diagnostic tools for optimal diagnosis

Special Chiro Tools Diagnostic tools for optimal diagnosis The Chiro Tools have been developed in cooperation with experts from the USA and Canada and offer great possibilities for diagnosing accurately as well as for planning further treatment. According to the tool used, automated center lines and points, defined curves, angle measurements etc., are generated after the manual selection of the points of interest. Axis line The tool creates a vertical or horizontal axis by holding down the left mouse button, depending on the direction, in which the mouse pointer is moved. Orthogonal line This...

George‘s line This tool is used to draw vertical lines on each vertebra along the spine in a lateral view and to calculate their distances (in mm). Horizontal or vertical aberrancy This tool calculates the horizontal or vertical aberrancy to the horizontal or vertical axis. By default the nearer axis is used for the calculation of the aberrancy. Circumscale Circumscale is a measurement tool used on a nasium/frontal view. An arc is drawn through three defining points and the diameter of the corresponding circle is displayed by default. Spinal curve This tool is used to draw an arc in the lateral...

Center point This tool calculates the center point in order to define a precise axis. Distance comparison This tool compares the distances between three set points (between point 1and point 2 and between point 2 and point 3). 52.9mm Mark intersection This tool marks the intersection of two intersecting lines. The default display of the intersection is a filled dot. OR Technology Digital X-ray and I m a gin g S olu t i o n s [Stamp of distribution partner]