Product Information GIERTH TR 90/20 Battery - Battery operated New design - maximum power Brief description: Battery operated HF X-ray unit with pulsefrequency modulation Total weight: 6800 g (battery included) Operator-friendly due to a centeredbalance point Innovative impact resistant construction DR interface for the connection with digital systems Latest Toshiba tube up to 90kV High Power mode (HP) Technology meets the radiation protection standards of tomorrow already today Activation of collimator light by hand switch Collimator including format preadjustment, dual laser pointer and spirit level Digital display and adjustment of mAs, sec., kV Display of battery charging status High-capacity Li-ion battery for about 300 exposures per charging Charging time: 240 minutes LED display “X-RAY”, “READY” and “ERROR” 5 memory buttons Acoustic and optic signal during exposure Construction: battery operated, pulsefrequencymodulation high frequency generator impact resistant construction Output in 2 kV steps: 40-60 kV = 20 mA (max.) 62-80 kV = 15 mA (max.) 82-90 kV = 10 mA (max.) 82-90 kV = 15 mA (max. HP mode) Dual laser pointer: 2 x class IIIa laser diodes, 12V DC X-ray tube: Toshiba D-0814 Focus: 0.8 mm mAs: 0.15 30 mAs Timer: digital, from 0.01-1.0 sec. Total filtration: OR Technology (Oehm und Rehbein GmbH), Neptunallee 7c, 18057 Rostock, Germany Tel. +49 381 36 600 600, [email protected], www.or-technology.com Inverter frequency: 100 kHz, full bridge inverter system Power requirement: 1.35 kVA Serial interface: DR RJ45 connector Weight: 6.8 kg incl. collimator, dual laser and battery Dimensions: L 265 mm, W 220 mm, H 180 mm Battery: Battery model: Lithium-ion battery Charging time: 240 minutes Line voltage : AC single phase, 130-260 V, 50/60 kHz battery operated, lightweight X-ray unit (only 6800 g) the completely charged battery allows about 300 exposures

GIERTH TR 90/20 Battery - Battery operated New design - maximum power Carrying case (incl.) Battery charger with battery Specifications subject to revision without notice The editor strives to impart correct and up to date information. The provided specifications are based on current knowledge and are subject to revision without notice. This brochure is subject to correction. The editor assumes no responsibility for the information being up to date, correct and complete. All furnished logos, pictures and graphics are property of the particular company and subject to copyright of the licensor....