P-TEST series
4Pages

ing of elastic or rigid medical devices such as blood lines, infusion and transfusion sets, , filters, oxygenators and many other disposable products. srational conditions can be programmed in a wide range of pressures and times. The =ST technical features, along with the new operative interface, makes its use even simpler. n be used for validation and qualification purposes on QA and R&D Departments, mainly in production lines for routine controls of finished products. P-TEST series performs 4 different test types: e Leak Test (Pressure Decay / Leak Rate) ¢ Single Obstruction Test (Pressure Moni- tor) only with P-TEST One and Nine ¢ Multiple Obstruction Test (only with P-TEST one) MEDICA Gruppo

LEAK TEST The device to be tested is connected to the test port of the equipment and it’s pressurized at the preset value. P-TEST checks the leak by measuring the pressure decay in the test time. OBSTRUCTION TEST (Pressure Monitor) only with P-TEST One and Nine The equipment can detect obstructions by blowing air through the part to test by) mean of the measure of the pressure at the inlet point. The equipment determ the condition of partial or total obstruction. VACUUM This solution can be used when two tests have to be performed at the same ti The two testers can be of different scale or...

ECURITY OF DATA & QUALITY SYSTEM fore its release to the market, quality and performances of the product need to be curately tested with our P-TEST, together with calibration and certification procedure rformed with certified equipment you can comply with this requirement. ternational Standards pay special attention to measuring and testing equipment. Melogical management of the testing equipment has become compulsory for all cominies that manufacture medical devices. Each new P-TEST is provided with a Calibrain Certificate with values measured at seven points of the scale. By taking...

HOLDER FOR BAGS Testing of medical plastic bags requires the use of dedicated holders to contain the plastic deformation due to the test pressure. Holders are available in two versions: Flat surface Knurled surface DATA RECORDER DATA RECORDER - Up to 8 leak testers connected - Usb key to store testing data - Possibility to insert usb key at any time and save data - Up to 100.000 saved records - 2 groups of three counters, each with a dedicated reset button: pass record-fail record-total counter flat surface knurled test surface at test surface knurled test surface Foot Switch for P-TEST Usb...