BOLVENT DISPENSER nt continuously circulates through the dispensing bushings by means of a fine | electronic pumping system. ispensing bushing is the “core” of our dispenser and it is manufactured thanks to long-time and proved experience according to specific customer requirements. es includes models equipped with Electronic Level Sensor (LS), programmable gulator (EFR) and “poka-yoke” alerting system (LS-SD) that help to guarantee roper dispensing. CHECK FOR: POWER SOLVENT

IVENT DISPENSER DS2/LS-SD DS2/LS-SD is a new version of Solvent Dispenser has some particular features designed to faciliate and to improve the operator’s working procedures. Main features : Buzzer and blinking red light which alert the = Sliding door which falls down when the dispenser is switched off and after some seconds after the q buzzer and red led alert. The purpose is to ensure the best quality in the dispensing in order to prevent the operator to work en the solvent reservoir is almost empty. This vern could be eventually available even for DSV and DSF versions. OPTIONAL CONFIGURATIONS...

DS2 equipped with two dispensing bushings for assembly manufacturing, when it is necessary to assemble two ditferent diameters of tubing or components. DSYV-T Vertical Dispenser for Chambers internal wetting. DSV equipped with one dispensing bushing for large tubing diameters or chambers. DSV-TOP Vertical dispenser for Chambers internal wetting (closed configuration). DSF equipped with four dispensing bushings for the assembly of products that require four different diameters of tubing or components. DS2, DSF, DSV dispenser models can be supplied in the following configurations: Vapor Conveyor...

SOLV-I] Our wireless solvent dispenser that needs no electric or pneumatic connections. Easier and quicker dispensing with reproducible bonding Minimal operators training No waste of solvents and clean dispensing Minimum environmental contamination SOLV-IT is a solvent applicator that works with a dispensing bushing, where the solvent is dispensed at the insertion of the tubing or connector. With a very simple design, SOLV-IT is very easy to use and requires simple maintenance. The absence of critical parts subject to wear or damage makes it very durable and consistent in its performances. OPTIONAL...

Solvent is carefully and precisely dispensed on tubing or components by means of special dispensing bushings: every different diameter of tubing or component requires a dedicated bushing, the same applies to dispensing lengths. If eieeary, bushings can be easily and quickly changed. Interchangeability is possible only within the same family-type of diameters described below. TECNOIDEAL can design and manufacture custom made dispensing bushings for special components or special applications and BUSHINGS FOR INTERNAL + EXTERNAL dispensing simultaneously. On reGuest, customized BUSHINGS FOR MICROBORE...

TECHNICAL FEATURES - HOW TO ORDER DS-FAMILY Main Supply : 115-230V 50-60Hz 10 VA - Working voltage: 24V, 50Hz Operating conditions: temperature form 5° to 45° C; relative room humidity:90% max Recommended aspiration flow with VCS 5+10 cubic meters/hour VCS Air speed with 0,3+0,5 cubic meters/hour Capacity reservoir (ml) 70 / 200 (DS-PLUS) PRODUCT CODES SOLV-IT MODEL VERSION * Languages sliding door: English, Spanish and Italian. Other languages available upon customer's r COMPATIBILITY OF OUR DISPENSERS WITH SOLVENTS Solv Isopropyl Alcohol