GREAT COST SAVING ON UV ADHESIVE BONDING

aie, To prevent unwanted polymerization of expensive UV adhesives DUV, UV adhesive dispenser has been designed for precise, repeatable and quick dispensing of UV adhesive on PVC, ABS and other medical polymers used for assembling medical products. DUV can dispense adhesive on the external (or internal) surfaces of tubing, on conical surfaces, needles and various types of connectors and components. Adhesive is continuously recirculated through the bushing by means of an electric pumping system, and precisely dispensed on medical tubing or components with custom made dispensing bushings by inserting...

DUV PLUS DUV PLUS is the only version which can perform dispensing on internal surfaces. This model is provided on request only. Each demand will be evaluated depending on the type of bonding that the cu- stomer needs to perform. adhesive dispenser which has some particular features : - Visual level indicator with marks indicating maximum/minimum glue level; - LED signaling system which alerts the operator when the glue level is low

DUV FAMILY FEATURES - Easier and quicker dispensing than any other traditional method or procedure: it is not necessary to wait or rotate the tubing (or component) inside the bushing because the adhesive wets the tubing (or component). - Reproducible bonding: when the tubing (or component) is pushed into the bush,a dead stop determines the right dispensing length and film of adhesive is accurately and uniformly dispensed all around the surface of the tubing or component. - Minimal operator training: the dispensing system guarantees reproducible adh quantities and mistake-proof operation. / -...