S-Micro XL is a temperature data logger from -40°C to 220°C (standard calibration from 25°C to 140°C, calibrable from 0°C to 220°C, only the probe will resist above 140°C) with 20 or 50 or 100 or 150 mm or on demand length external probe (probes cannot be switched) on a 5 mm base (base height is not counted for probe length), managed with Windows software and USB reading bay: DiskInterface HS, Multibay. Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable cetificate on 6 points. It is supported by the TS Manager software for validation compatible with the FDA 21 CFR Part 11 and GAMP 5 regulations. Applications Note: if used below -30°C, battery life will be highly reduced. When device is calibrated above 140°C accuracy and resolution might be less than what declared. Main features • With different lengths rigid probe for penetration • Completely food grade and waterproof • All software calculate lethality value (F0, PU, A0 ecc.) • Low battery consumption for an extended battery life • User replaceable battery (software shows battery status) • Very easy to deploy in any type of package • Accredia (NIST equivalent) traceable calibration certificate included • Available extended calibration from -40°C to 220°C (order extra calibration points; in case of wide calibration range the accuracy might be worse) • Heat protections available for use above 140°C Plus • Extremely high accuracy and precision: with an accuracy of ± 0,1°C these devices can be employed in any application involving food, pharmaceuticals, validation, laboratory and medical field • Fast response time thanks to the 3 mm diameter probe • Printed reports compliant with health regulations and ISO (data are not editable in the software) • Thanks to its reduced diameter it can be easily used in the narrow pasteurisation tunnels, especially for fresh filled pasta The system The system is made up by: • S-Micro XL temperature data logger • DiskInterface HS or Universal Multibay • SPD software or TS Manager software (compatible with the FDA 21 CFR Part 11 regulation) Accessories • SPD • TS Manager • DiskInterface HS • Universal mult

• Locking bolt • Fastening system • Teflon protective tube • S-Micro XL / S-MicroW XL heat protection 1 • S-Micro XL / S-MicroW XL heat protection 2 • S-Micro XL battery kit • Universal tool for opening logger tecnosoft |r« WE DELIVER DATA H|W Tecnosoft srl Via Galvani, 4, 20068, Peschiera Borromeo (Ml), Italy T: (+39) 02 2692 2888 - F: (+39) 02 2692 2875 email: [email protected] - web: www.tecnosoft.eu UNI EN ISO 9001:2008 Certiquality/IQNet N. 17733