S-MicroW L Ultra Freeze S-MicroW L Ultra Freeze is a data logger for ultra low temperatures from -80°C to 140°C (calibration from -40°C to 140°C) with 20, 100 mm or on demand length external probe (probes cannot be switched) on a 5 mm base (base height is not counted for probe length), managed with Windows software and USB interface (DiskInterface HS, Multibay). Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable cetificate on 6 points. The data logger looks like the S-MicroW L standard but it includes a calibration from -40°C. With calibration from -40°C it can be used also at -80°C with an accuracy within ± 0,5 °C within range -80 °C ÷ -40 °C. If -80°C is requested to be on the certificate, an extra calibration point for very low temperatures must be purchased. It is particularly indicated for monitoring and validation of ultra freezers. Note: if used below -30°C, battery life will be highly reduced. Mission max duration at -80°C: 12 hours. Using the logger for long periods below -40°C will constantly reduce mission max duration. For longer missions purchase the -80°C special battery for S-MicroW L Ultra Freeze. With -80°C special battery mission max duration at -80°C with the special battery: 2 months. Using the logger for long periods below -40°C will constantly reduce mission max duration. Max temperature of use of the -80°C battery is 80°C: REMOVE IT AND USE STANDARD BATTERY TO USE THE LOGGER IN AUTOCLVE OR ABOVE 80°C. Main features With different lengths rigid probe for penetration Completely food grade and waterproof All software calculate lethality value (F0, PU, A0 ecc.) Low battery consumption for an extended battery life User replaceable battery (software shows battery status) Very easy to deploy in any type of package Accredia (NIST equivalent) traceable calibration certificate included from -40°C Available extended calibration from -80°C (order extra calibration points; in case of wide calibration range the accuracy might be worse) Plus Extremely high accuracy and precision: with an accuracy of ± 0,1°C these devices can be employed in any application involving pharmaceuticals, validation, laboratory and medical field High accuracy even outside the calibration range Save money on calibration costs with calibration from -40°C included High accuracy even from -80°C Fast response time thanks to the 3 mm diameter probe Printed reports compliant with health regulations and ISO (data are not editable in the software) The system The system is made up by: S-MicroW L temperature data logger DiskInterface HS or Universal Multibay SPD software or TS Manager software (compatible with the FDA 21 CFR Part 11 regulation) Food & Beve

Accessories • SPD • TS Manager • Tecno Calib • DiskInterface HS • Universal multibay • Locking bolt • Fastening system • Teflon protective tube • S-MicroW L battery kit • S-MicroW L Ultra Freeze -80°C battery kit tecnosoft |r« WE DELIVER DATA H|W Tecnosoft srl Via Galvani, 4, 20068, Peschiera Borromeo (Ml), Italy T: (+39) 02 2692 2888 - F: (+39) 02 2692 2875 email: [email protected] - web: www.tecnosoft.eu UNI EN ISO 9001:2008 Certiquality/IQNet N. 1