reinforced bone substitute Hybrid formula Advancing High Technology

Thanks to the hybrid formula ß-TCP + Advantages of the ß-TCP component: Osteoconductivity1 Bone tissue gradually grows inside the biomaterial.6 The ß-TCP portion is gradually reabsorbed, leaving space for bone ingrowth. Osteoconductivity favoured by porosity Open porosity2 Special ß-TCP + PMMA formula Part of the fine powder that constitutes the material Cavities up to 500 µm, obtained by the programmed dissolution of a pre-set number of ß-TCP granules The special formula allows fluids to penetrate inside the material, to favour bone ingrowth. The bone is able to rebuild in a more diffuse manner....

TIVE REINFORCED BONE SUBSTITUTE + PMMA, it combines the advantages of both components. Advantages of the PMMA component: It achieves maximum mechanical resistance immediately after polymerization. Compressive strength Calcemex* vs cancellous bone7 Unaltered resistance over time. Long-lasting support for bone tissue. Unchanged volume over time. Cancellous bone Superior performances Compressive strength5 Calcemex boasts superior mechanical resistance to bone substitutes containing calcium sulphate (CS), calcium phosphate (CP) and hydroxyapatite (HA). * In-house tests performed according to ISO...

Ordering information Code Cal-CEMEX + Shakit + Xtruder Sbarbati A. In Vivo Study - Osseointegration at 52 Weeks. Dept. Neurological, Neuropsychological, Morphological and Motor Sciences, Human Anatomy and Histology Section, University of Verona, Italy. Le Huec JC, Schaeverbeke T, Clement D, Faber J, Le Rebeller A. Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compressive stress. Biomaterials. 1995, Jan; 16(2): 113-8. Larsson S, Hannink G. Injectable bone-graft substitutes: current products, their characteristics and indications, and new developments. Injury....

THE DEVICE FOR EASY AND FAST APPLICATION EVEN EVOF HIGH VISCOSITY RESINS AND BONE VOID FILLERS is the new Tecres device for application of acrylic resins and bone void fillers prepared with the Shakit mixer. ADVANTAGES: - easy to fill Thanks to the scraper ring, all you have to do is insert the into Xtruder syringe Shakit and the product will flow into the syringe until it is full - easy to apply The specially designed shape and size of the ergonomic grip allow The specially designed shape and size of the ergonomic grip allow very easy extrusion of low, medium and even high viscosity resins....

THE DEVICE FOR EASY MIXING EVEN OF HIGH VISCOSITY RESINS AND BONE VOID FILLERS CHARACTERISTICS: - with Shakit the material can be mixed by shaking or using a spatula or using a spatula (based on the grammage and viscosity of the resin or bone filler)* - mixing by shaking of high viscosity material is optimised by a hammering ball inside the device. * Shakit mixes by shaking up to 20g 20g of low/medium viscosity andto 10g 10g of high viscosity powder. mixes by shaking up to of low/medium viscosity and up up to of high viscosity powder. PREPARATION PHASES 1 Pour the powder and liquid into the container...