PHANTOM CS ANTERIOR CERVICAL ACCESS SYSTEM Evolving The Surgical Standard

THE EVOLUTION OF THE ANTERIOR APPROACH TO THE CERVICAL SPINE With over 60 years of continued innovation, anterior cervical surgery has proven to be an efficacious and safe approach to treat cervical spine disease supported by two pillars: evolution of the technique and the development of next generation instrumentation technology. In pursuit of this continued technique evolution, Phantom CS™ Anterior Cervical Access System from TeDan Surgical Innovations introduces a next-level approach to efficiently access the cervical spine, meeting the increasing challenges of the modern-day operating room....

SEEING IS ALL THAT MAT TERS Efficient exposure has been a central mission of TeDan Surgical Innovations since its inception in 2006 and underpins the design of the Phantom CS Access System. Transverse and longitudinal selfretaining retractors are thoughtfully engineered for efficient exposure to the cervical spine through an independent pivoting mechanism, fluid blade engagement, and low-profile design. Safeguarding Vital Structures The pivoting mechanism on the Phantom CS Pivoting Side-Load Retractors ensures the surgeon can control inward anatomical force on the retractor blades and minimize...

Phantom CS Sure-Lock Blade Locking Mechanism Phantom CS Lever-Lock Blade Locking Mechanism The Sure-Lock allows for quick release from the top of the retractor arm at the end of a procedure while the Lever-Lock release located further from the blade interface prevents surgical glove snags that result in costly procedural interruptions. Both types of locking mechanisms are compatible with fixed or swivel retractor blade connector designs. Transverse Retractors and Accessories Cat. No. Phantom CS Transverse Side-Load Retractor, 120 MM Rack1 Phantom CS Transverse Side-Load Retractor, 150 MM Rack1...

LONGITUDINAL ACCESS. A STEP ABOVE. The dual-jointed arm design of the transverse and step-over longitudinal retractors work in concert to create an unencumbered, low-profile access system assembly. For the lowest profile access system, the step-over design of the Phantom CS Step Over Side-Load Retractor, 120 MM Rack (CS-0102) and Phantom CS Step Over Lever-Lock Retractor, 120 MM Rack (CS-0202) is a crucial component ensuring undisrupted surgeon focus. Phantom CS Step-Over Side Load Retractor, 120 MM Rack (CS-0102) Rooted on a Classical Approach Phantom CS Longitudinal Side-Load Retractor (CS-0101)...

HAND-HELD RETRACTION. ON DEMAND. Underpinned by the common hand-held retraction principle introduced through Cloward’s pioneering surgical technique1, the Phantom CS Retractor Blade Handle (CS-0105) transitions this surgical approach to the evolved Phantom CS side-loading capability. Engaging seamlessly with the Phantom CS Blade Cross-Cut™ Ball-Snap-Type Connector, a variable length hand-held retractor emerges as a new standard for gentle tissue and muscle retraction. The one-of-akind, Cross-Cut design eliminates blade movement through positive engagement with the groove of the Cross-Cut. The...

PERSONALIZED RETRACTION, REALIZED. The need for reliable, yet low impact retraction has been addressed through the continued innovation of retractor blade designs. Phantom CS Retractor Blades have been specifically engineered for the retraction of critical anatomical structures as individual as every patient. Short tooth blades, designed for use with a transverse retractor, retract the carotid sheath laterally whereas long tooth blades, retract the esophagus, longus colli muscle, and trachea medially. Blunt blades are engineered to retract soft tissue longitudinally. Phantom CS blades are available...

Phantom CS Cervical Depth Gauge (CS-0106) The Phantom CS Cervical Depth Gauge (CS-0106) is used in combination with Phantom CS aluminum retractor blades for colorcoded identification of the desired blade lengths based on the Cervical Depth Gauge reading after finger dissection. The Depth Gauge allows seamless blade selection, improving the surgical workflow, saving time, and minimizing costs.

RETRACTOR BLADES FOR TRANSVERSE RETRACTION Short Tooth Blades Short Tooth Blades are recommended for use with the transverse retractor to retract the carotid sheath laterally and provide access to the cervical spine. Their convex design and short-tooth distal end have been specifically engineered to retract this critical anatomical structure. Cat. No.* Phantom CS Short Tooth Blade, 23 x 20 MM, Teal through Phantom CS Short Tooth Blade, 23 x 85 MM, Silver Aluminum Swivel Connector 5 MM Increments Phantom CS Short Tooth Blade, 23 x 20 MM, Teal, Pinned through Phantom CS Short Tooth Blade, 23 x...

RETRACTOR BLADES FOR LONGITUDINAL RETRACTION Blunt Blades Blunt Blades, thoughtfully engineered to retract soft tissue longitudinally during an anterior cervical procedure, have a convex lip design designed to conform to the vertebral body. Cat. No.* Phantom CS Blunt Blade, 23 x 30 MM, Silver through Phantom CS Blunt Blade, 23 x 75 MM, Orange Aluminum Swivel Connector 5 MM Increments Phantom CS Blunt Blade, 23 x 30 MM, Silver, Pinned through Phantom CS Blunt Blade, 23 x 75 MM, Orange, Pinned Aluminum Fixed Connector 5 MM Increments Phantom CS Blunt Blade, 20 x 20 MM, Teal through Phantom CS Blunt...

UNIQUE PATIENT ANATOMIES HAVE MET THEIR MATCH Delta Blades Delta blades have a narrow profile proximally and wide design distally, ideal for maximizing visualization in multi-level surgery. The short tooth configuration is ideal for transverse retraction. Cat. No. Phantom CS Delta Style Blade, 30 MM, Titanium through Phantom CS Delta Style Blade, 60 MM, Titanium Titanium Swivel Connector 5 MM Increments Phantom CS Delta Style Blade, 45 MM, Titanium (CS-1733) Discectomy Blades Discectomy blades are available in titanium and aluminum and have an elliptical opening at the distal end of the blade,...

Dual Blade Holder Improve multi-level procedure efficiency with the Phantom CS Dual Blade Holder (CS-1710) used to retract laterally or medially with not one but two blades. Deploy Phantom CS Retractor Blades in the Phantom CS Dual Blade Holder, position with the Phantom CS Retractor Blade Handle, and lock into the side-loading blade engagement of the Phantom CS Tranvserse Retractor. Cat. No. Phantom CS Dual Blade Holder Phantom CS Dual Blade Holder (CS-1710) Phantom CS Short Tooth Blade, 23 x 45 MM, Green (CS-0053) Paddle Blade The Phantom CS Paddle Blade, 20 x 55 MM, Black (CS-0040) and Phantom...