User Guide – Evaluation Kit – P&S T45 Electronic Sprayer Kit P&S T45

Table of Contents1. About Tekceleo2. Conditions of Use and Best Practice - Warnings and best practice - General maintenance - Kit’s parts presentation - Technical datasheet - Fluidic system integration - Cable management - Nozzle control - Pump control

ABOUT US Tekceleo is a forward-thinking technology company dedicated to innovation and the creation of cutting-edge solutions. With a commitment to excellence, we specialize in providing innovative solutions with advanced motion and aerosol generation technologies. Our mission is to simplify and empower lives across various industries, including medical, pharma, aerospace, and industrial automation. Tekceleo's diverse team of experts collaborates to drive technological advancements and deliver results that exceed expectations. We're not just a company, we're a catalyst for progress, and we invite...

Evaluation Kit - Conditions of Use Warning and Best Practices 1. General Characteristics Liquids : - Reference liquid for standard use of H-T45 nozzles is Reverse Osmosis (RO) Water, with a >25 pS/cm conductivity. - For operation, avoid use of liquid with conductivity inferior at 25 pS/cm (i.e. pure, deionized or distilled water). - For operation, avoid use of viscous liquid (information on demand). - Nozzle can sustain a temperature from -20°C to +65°C, range of temperature can be increased on demand (up to +120°C). - Nozzle can sustain very high relative humidity but are not fully waterproof,...

Evaluation Kit - Conditions of Use General Maintenance 2. Maintenance Preventive maintenance: - In case of use of corrosive and/or liquid with risk of clogging, it is recommended to set a cleaning routine by purging the system and making it operates with RO or distilled water for a short period of time. - Nozzle and system can be cleaned using ethanol-based biocide. Corrective maintenance : - Use 1/100 white vinegar to unclog the nozzle, or organic solvent for more than 1 minute. Best Practices : • Always check the liquid you’ll use, if you have any interrogation contact Tekceleo’s team. • Setting...

The purpose of this kit is for you to easily use, test, evaluate and implement Tekceleo’s unique aerosol generation technology. To understand more about our technology, you can consult our website : Tekceleo’s team is here to help you moving forward in your use case, for information, this kit intended use is for: • Directly use our technology, as this kit is a standalone system that can be already used. • Evaluate our technology, in order to ensure its viability for your project. • Prototype : all the parts of this kit are modular and can be implemented in a prototype. • Be integrated directly...

Kit Presentation – Presentation of Parts Content and included parts of this kit WITH CASING TERMINAL BLOCK MINI TERMINAL BLOCK

H-T45 Nozzle Datasheet H-T45 Nozzle Outputs

Electronic Control Unit (ECU) Datasheet H-T45 Electronic Control Unit (ECU)

Kit Presentation – Technical Datasheet Electronic Control Unit (ECU) – HMI Set Up Operation without the HMI : Operation with the HMI : You can setup the ECU with Please make sure that the ECU is setup with

H-T45 Human Machine Interface (HMI)

Kit Presentation – Technical Datasheet Integrated tank specifications Please make sure not to fill more than 10ml of liquid in the tank. This might lead to dripping.

> Unscrew the cap located on the nebulizer's integrated tank. > Fill in the integrated tank with the liquid you want to nebulize. > Make sure the maximum tilt for the aerosol head is 45°. > For the electronic assembly please make sure to plug the 12V power supply to the 12Vin of the IHM P&S at the very end : • “12Vout” connector to “Power” connector • “Neb” connector to “Control” connector 2. Connect the H-T45 electronic sprayer to the ECU NEB via the “microfit 3.0 2P” cable. 3. Connect the “12Vpower supply” to the “12Vin” of the IHM P&S and then follow the instructions on the IHM P&S : Quick...

Evaluation Kit – Configuration & Set-up Cable Management Schematics TERMINAL BLOCK Nozzle Power Supply (Microfit 3.0 2P) MINI TERMINAL BLOCK Please do not use the Pump connector of the HMI when using a T45 nozzle

Evaluation Kit – Electronic Control - PWM Overview of Control Methodology – Nozzle ECU Implementing ON/OFF and Flowrate Control with PWM : • Use the connector terminal block PWM control : - 100% Duty Cycle : ON (150 Hz frequency) - 0% Duty Cycle : OFF (150 Hz frequency) From 0% to 100% : flowrate is linearly proportional to the PWM duty cycle. Please refer to the attached graph. Relationship between Aerosol Flow Rate and PWM Duty Cycle 100% Important Notes : Duty Cycle • Default state of the electronic control when switch is on PWM is always ON at 100% flowrate when p

Overview of Control Methodology - Nozzle ECU Implementing ON/OFF and Flowrate Analog Control : • Use the Mini terminal block connector • Analog Control: From 0V to 10V : flowrate is linearly proportional. Please refer to the attached graph. Important Notes : • Default state of the electronic control when switch is on ANALOG is always OFF when powered.

Evaluation Kit - Technical Support Tekceleo’s offer a complete technical support • Directly contact your salesperson for any question. You can also directly contact Tekceleo using the [email protected] email address. • In case of any trouble or issue you can freely open a support ticket by following this process : - Object: order number + name of company. - Content : explain the problem you’re experiencing and join as many data, picture or video that you can to help us troubleshoot your problem. • Tekceleo’s team will get back to you as soon as possible to troubleshoot and resolve your problem....