CMOS Flat Detector for Dynamic X-Ray Imaging Xineos CMOS X-Ray Flat Detectors: Better Images, Lower Dose The Xineos-1515 CMOS flat detector sets a new benchmark in low dose imaging performance. Built with our sixth generation CMOS technology, Xineos-1515 offers switchable saturation dose to maximize dynamic range or sensitivity on demand. With a 15x15 cm active area, the Xineos-1515 images from the top of the TMJ to the bottom of the adult mandible, and with a programmable region of interest (ROI) that is flexible in size, position and frame rate (e.g. 15x1 cm @ 300 fps), a single detector can deliver optimized image quality for different procedures, e.g. both Dental CBCT and Panoramic 2-in-1 systems. Key Features • atest generation CMOS technology; L even lower noise, lower power consumption • witchable pixel sensitivity for S highest sensitivity AND highest dynamic range • nmatched image quality at low U doses, best-in-class DQE at all doses • igh frame rates: 30 fps full H resolution, up to 300 fps with adjustable ROI mode • erves dental CBCT and Panoramic S with the same detector • mallest shoulder edge distance in S industry for better patient access • Negligible image lag Typical Applications • Dental CBCT + Panoramic • Orthopedic Surgery • Industrial / Non-Destructive Testing Contact us for information about different data interface options Industry-leading low-dose performance and high resolution make Xineos-1515 ideal for orthopedic interventions. The Gigabit Ethernet version features built-in gain/offset (flat-field) and advanced defect pixel correction ensure optimal raw image quality. The Xineos-1515 also features the industry’s smallest shoulder edge distance (7.3 mm), enabling better patient access and compact enclosure designs. With no need for active cooling, this low power CMOS X-Ray detector delivers increased reliability in heavy-duty applications. Specifications (Typical Values @ RQA5) Resolution Pixel Size Area Saturation Dose - High Dynamic Range Mode - High Sensitivity Mode Frame Rates - Full area, full resolution - Full area, 2x2 pixel binning - 15x1 cm ROI, full resolution ADC Conversion Dynamic Range - High Dynamic Range Mode - High Sensitivity Mode DQE (@ 0 lp/mm, RQA5) MTF (@ 1 lp/mm, RQA5) Image Lag Data and Control Interface Power Supply Power Consumption Weight

CMOS Flat Detector for Dynamic X-Ray Imaging Detective Quantum Efficiency (DQE): To become an accurate indicator of detector performance, DQE value must be reported at a specific dose value. For dynamic X-ray applications the meaningful doses should be very low. This requirement is the primary goal of the Xineos architecture. While Xineos routinely achieves 70% or higher DQE at doses of 2 uGy (230 µR), the detector performance is not compromised at 10 nGy (1.1 µR) entrance dose level. www.teledynedalsa.com Americas Waterloo, ON +1 519-886-6000 [email protected] Europe Eindhoven,...