Catalogs >
Telic >
Surface electrodes

Surface electrodes
2Pages

Catalog excerpts

Technical data sheet Product description Disposable adhesive surface electrodes are designed for recording, monitoring and stimulation of biopotential signals. Electrodes are applied during studies such as electromyography (EMG), intraoperative monitoring (IOM), nerve conduction (NCS), evoked potential (EP), and polysomnography (PSG). They are non-invasive as they are applied to the patient's skin using a self-adhesive solid hydrogel layer. 0344 Product characteristics Manufactured with a combination of solid hydrogel on a non-woven fabric support, they ensure excellent adhesion to the skin, as well as a clear and precise signal. They are flexible and easy to reposition, for single patient use. Technical specifications Non-woven fabric Carbon and solid hydrogel Siliconed PET Plasticized copper PVC Latex-free Fulfils with the requirements of the norms Technical characteristics • Conductive support: • Conductive wire: • Latex content: This document is the property ofTelic, S.A.U. Transmission to third-parties or non-authorized copies are not allowed. 1 - 2

Open the catalog to page 1

Technical data sheet Packaging Reference Sizes Cable Cablecolour Packaging blue, red 10 pouches case blue, red 10 pouches case 20 pouches case TN40502M 40 x50 mm 2 m Green lunitpouch, Instructions for use • Apply only to sound skin. Clean the site thoroughly before using, to remove lotions, dirt, etc. • Dry the application site completely. • Cut the hair if necessary without shaving or scraping the area. • Remove the electrodes from the packaging. Peel the electrodes from the coating by lifting the edge of the elec trode. • Apply the electrodes by pressing first in the centre of the pad...

Open the catalog to page 2

Surface electrodes 2Pages

Catalog excerpts

All Telic catalogs and technical brochures

Surface electrodes
2Pages