Catalogs >
Thermo Scientific >
Multi Tube Rotator

Multi Tube Rotator
1 / 13Pages

Catalog excerpts

Multi Tube Rotator

Safety Information Alert Signals Warning Warnings alert you to a possibility of personal injury. Your Thermo Scientific Lab-Line Multi Tube Rotator has been designed with function, reliability, and safety in mind. It is your responsibility to install it in conformance with local electrical codes. It is most important that the user follow installation instructions exactly as written. Failure to do so is likely to lead to improper operation, erroneous calibrations and possible damage to the equipment. Do not attempt operation without this information. Caution Cautions alert you to a...

Open the catalog to page 3

Description The model 4632Q Multi Tube Rotator mixes the contents of blood tubes and other vessels making it ideal for use in hematology, blood chemistry and other laboratory applications where a continuos, gentle motion is necessary. The mechanical action of the unit provides a circular motion coupled with a rocking pattern that keeps liquids and solutions gently mixed without the potential for shearing or other damage. The portable, lightweight metal body is durable and easy to clean. The rotator's compact size permits easy transportability and use in areas with limited space. The white...

Open the catalog to page 4

Specifications Power Requirements Model 4632Q: Model 4632-1CE & 4632-1CECN: 120 VAC, 60 Hz, 0.03 Amps, 4.0 Watts 220-240 VAC, 50 Hz, 0.03 Amps, 4.0 Watts Shaker Motion Bi-directional rotation. Shaker Speed (fixed) 30 revolutions-per-minute. Angle of Rotation 20º from the horizontal plane

Open the catalog to page 5

Declaration of Conformity (For 220 to 240 volt, CE models only) We hereby declare under our sole responsibility that this product conforms with the technical requirements of the following standards: Limits for harmonic current emissions Limits for voltage fluctuations and flicker Electrical equipment for measurement, control, and laboratory use; Part l: General Requirements Safety requirements for electrical equipment for measurement, control, and laboratory use; Part I: General Requirements Part II: Particular requirements for laboratory equipment for the heating of materials Part II:...

Open the catalog to page 6

Unpacking and Installation Shipping Carton This should be inspected upon delivery. When received, carefully examine for any shipping damage before unpacking. If damage is discovered, the delivering carrier should both specify and sign for the damage on your copy of the delivery receipt. Open the carton carefully making certain that all parts are accounted for before packaging materials are discarded— after unpacking, if damage is found, promptly report it to the carrier and request a damage inspection promptly. IMPORTANT: Failure to request an inspection of damage within a few days after...

Open the catalog to page 7

Note Position rotator so that in case of emergency the plug is within easy to be quickly disconnected from the power outlet. Location For optimum performance, place the unit on a level, stable surface and in an area free from drafts, extraneous heat sources and vibration. Be sure to provide clearance on all sides so as to avoid contact of the moving platform with any surrounding equipment or objects. Do not use in a room with a temperature higher than 40ºC. Do not use in a room with a temperature lower than 15ºC. Do not use in a damp atmosphere.

Open the catalog to page 8

Operation Control Panel Warning Do not use in the presence of flammable or combustible materials or explosive gases—fire or explosion may result causing death or severe injury. Choose one side of platform mat that matches the size of the vessels being used. Note If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Plug power cord into appropriate three prong grounded outlet whose characteristics match those on the rotator's data plate. Turn power on by placing power switch in the I position. Green LED should light....

Open the catalog to page 9

Maintenance Neutralizing Spills Note Make no attempt to service or repair a Thermo Scientific product under warranty before consulting your distributor. After the warranty period, such consultation is still advised, especially when the repair may be technically sophisticated or difficult. In the event of any spills on the surfaces of the unit, carry out appropriate neutralization procedures and wiped off using a clean cloth dampened with a cleaning solution made of warm water and a mild detergent. Surfaces should then be wiped with a second cloth dampened with clean water and dried...

Open the catalog to page 10

Replacement Parts Description Part Number Bearing Bellows Cordset, 4632Q Cordset, 4632-1CE Cordset, 4632-1CECN Fuse, 0.5 Amp Motor 120V, 60 Hz Motor 240V, 50 Hz Rotator Spindle Rubber Feet (4) Rubber Mat Switch Wiring Schematic, 120V unit

Open the catalog to page 11

Ordering Procedures Please refer to the Specification Plate for the complete model number, serial number, and series number when requesting service, replacement parts or in any correspondence concerning this unit. All parts listed herein may be ordered from the Thermo Scientific dealer from whom you purchased this unit or can be obtained promptly from the factory. When service or replacement parts are needed we ask that you check first with your dealer. If the dealer cannot handle your request, then contact our Customer Service Department at 563-556-2241 or 800-553-0039. Prior to returning...

Open the catalog to page 12

Multi Tube Rotator 1 / 13Pages

Catalog excerpts

All Thermo Scientific catalogs and technical brochures

Multi Tube Rotator
1 / 13Pages