Catalogs >
Thermo Scientific >
Nunc Cell Factory Shaker System

Nunc Cell Factory Shaker System
1 / 8Pages

Catalog excerpts

DATA SHEET Nunc Cell Factory Shaker Nunc Cell Factory Shaker System Eliminate traditional methods of cell detachment The Thermo Scientific™ Nunc™ Cell Factory™ Shaker System offers a high-quality, automated solution for the consistent detachment of cells from Thermo Scientific™ Nunc™ Cell Factory™ systems; it eliminates the need for shaking and pounding of the Nunc Cell Factory systems, supporting workflow dependability and efficiency. Features and benefits • Can handle twelve 10-layer or four 40-layer standard Nunc Cell Factory systems (twelve 13-layer or four 52-layer Nunc High Density Cell Factory systems) • Performs a continuous, horizontal accelerated and decelerated movement • Programmable shaking time • Shaking frequency can be adjusted between 0 and 2 Hz • All visible components made of 304L stainless steel for easy cleaning • Standard safety light curtain • Can be part of a closed-system workflow Designed to work seamlessly with: • Thermo Scientific™ Nunc™ Cell Factory™ racks and carts • Thermo Scientific™ Nunc™ Cell Factory™ Incubator • Thermo Scientific

Open the catalog to page 1

Nunc Cell Factory Shaker System design features and options 1. Protective cover 5. Emergency stop button 2. Safety light curtain Control compartment Front view PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE INCHES [mm] AND ARE IN ACCORDANCE WITH ASME 14.5M-1994 SPECIFICATION NUMBER DECIMALS: INCHES [mm] .X [.X] = .XX [X.X] = .XXX [X.XX] = .XXXX [X.XXX] = .0005 [0.013] THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO THERMO FISHER SCIENTIFIC. ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DRAWING IS EXPRESSLY PROHIBITED EXCEPT AS THERMO FISHER SCIENTIFIC MAY AUTHORIZE IN WRITING. 1726...

Open the catalog to page 2

3. THE SHAKER CONTROL CABINET, OUTSIDE PANELS AS WELL AS MOST PARTS OF THE STRUCTURE ARE MFG. FROM SS 304 (1.4301). 4. ALL OUTSIDE PANELS ARE SMOOTH AND BRUSH-FINISHED, ALL TRANSITION JOINTS SEALED WITH SILICONE. 5. THE BASE PLATE IS MFG. FROM 60mm THICK POWDER COATED STEEL. 6. LINEAR SHAKING MOVEMENT IS GENERATED BY A SPUR GEAR MOTOR WITH AN ECCENTRIC DISK. 7. A FREQUENCY CONVERTER CONTROLLS THE VARIABLE SPEED OF THE MOTOR RESULRING IN VARIALBLE SHAKING FREQUENCY. 8. A VACUUM PUMP SYSTEM IS USED WITH SUCTION CUPS TO HOLD THE TRANSFER CART IN PLACE DURING LOADING/UNLOADING ON THE RACK...

Open the catalog to page 3

Accessories Nunc Standard Cell Factory systems Obtain faster results and lot-to-lot consistency with Nunc Cell Factory systems. A proven solution for large-scale production of cells, vaccines, and therapeutic proteins, these systems have the same growth kinetics as laboratory-scale cell culture products. The ports of the system make it easy to customize and close, with custom tubing assemblies that facilitate venting, filling, and harvesting; available in 1-, 2-, 4-, 10-, and 40-tray versions. Standard Cell Factory systems Sterile polystyrene chambers with Thermo Scientific™ Nunclon™ Delta...

Open the catalog to page 4

Nunc High Density Cell Factory systems Thermo Scientific™ Nunc™ High Density Cell Factory systems provide a simple solution for increasing cell culture yields. With their additional layers, the Nunc High Density Cell Factory systems are designed to optimize your process by increasing your output, while maintaining the same manufacturing footprint as that of the standard Nunc Cell Factory system. Nunc High Density Cell Factory systems Sterile polystyrene chambers with Nunclon Delta surface. Cell culture area Nunc EasyFill Cell Factory systems Thermo Scientific™ Nunc™ EasyFill™ Cell Factory™...

Open the catalog to page 5

Nunc Cell Factory system accessories Nunc Cell Factory accessories support the use of aseptic methods for fluid handling relating to filling, inoculation, feeding, and harvesting procedures of the Nunc Cell Factory system. These accessories enable the further development of applications requiring a more closed cell culture system, reducing the number of open interventions. Key features • Connect media bag or tubing set to any Nunc Cell Factory system for enhanced aseptic connectivity for filling and harvesting • Prevent buildup of back pressure during filling • Venting options provide...

Open the catalog to page 6

Nunc Cell Factory racks and carts Integration with all Nunc Cell Factory equipment Easily store and transport Nunc Cell Factory systems safely and efficiently using Nunc Cell Factory Racks and Carts. Each rack can hold up to four Nunc Cell Factory 40-layer systems or twelve Nunc Cell Factory 10-layer systems. Racks and carts are designed to integrate perfectly with all Nunc Cell Factory equipment, adding consistency to and streamlining your process. Features • Can handle twelve 10-layer or four 40-layer standard Nunc Cell Factory systems (twelve 13-layer or four 52-layer Nunc High Density...

Open the catalog to page 7

Ordering information Description Nunc Cell Factory Shaker System Nunc Cell Factory Shaker System, Gen 2, 208–240 V, 50/60 Hz, single phase Nunc Cell Factory racks and carts Side Loading Rack with Cart for 40-layer Nunc Cell Factory systems and 52-layer Nunc High Density Cell Factory systems Side Loading Rack with Cart for 10-layer Nunc Cell Factory systems and 13-layer Nunc High Density Cell Factory systems Retrofit Clamping Kit for Racks for Use with Shaker Find out more at thermofisher.com/cfequipment For Research Use or Further Manufacturing. Not for diagnostic use or direct...

Open the catalog to page 8

Nunc Cell Factory Shaker System 1 / 8Pages

Catalog excerpts

All Thermo Scientific catalogs and technical brochures

Nunc Cell Factory Shaker System
1 / 8Pages