Thermo Scientific Sorvall CW2 Plus Blood Cell Washing System Precise, automated performance for blood cell washing

Thermo Scientific Sorvall CW2 Plus Blood Cell Washing System This advanced, easy-to-use instrument simplifies work and reduces time required to wash blood cells for antiglobulin reagent tests such as ABO compatibility, Rh testing, cross matching and the Coombs procedure. Fully Automated for Reproducible Results Standardized, consistent procedures eliminate the variations that result from manual protocols, so reliable, reproducible results are a matter of routine. Automatic alerts indicate if the saline level is low, and when a run is complete. Compact and Durable The Sorvall CW2 Plus fits neatly...

Maximize Antiglobulin Reagent Reactivity An automatic decanting cycle, with its reproducible speed and angle, consistently removes more saline than even the most skillful hand decanting, leaving a dry cell button. For washing, the rotor allows tubes to swing at a fixed positive angle to sediment cells rapidly at the bottom of the tube. For decanting, the rotor holds tubes at a slightly negative angle and the saline is decanted centrifugally. There is virtually no dilution of the Coombs serum, since red cells form a very high percentage of the final tube volume after saline washing. One distributor...

Specifications and Ordering Information Thermo Scientific Sorvall CW2 Plus Blood Cell Washing System Specifications Maximum speed (rpm) Fill/decant speed (rpm) Maximum RCF (x g) Decant RCF (x g) Maximum capacity Operating modes Automatic Manual Check Controls Mode Cycle Time Command Drive Construction Rotor Collection bowl Certification Safety and effectiveness Dimensions (H x D x W) mm (inches) Weight kg (lb) Sorvall CW2 Plus 3,550 at 60 Hz 700 at 60 Hz (580 at 50 Hz) 1,200 40 (12) 12 mm x 75 mm or 10 mm x 75 mm tubes 85 second wash cycle High speed for time selected Stops at end of each step...