Thermo Scientific Pico 17 / 21 Instructions for Use 50133388-e • 06 / 2020 Visit us online to register your warranty:

WEEE Conformity This product is subject to the regulations of the EU Waste Electrical & Electronic Equipment (WEEE) Directive 2012/19/EU. It is marked by the following symbol:

Thermo Scientific

Thermo Scientific

Preface Before starting to use the centrifuge, read through this instruction manual carefully and follow the instructions. The information contained in this instruction manual is the property of Thermo Fisher Scientific; it is forbidden to copy or pass on this information without explicit approval. Failure to follow the instructions and safety information in this instruction manual will result in the expiration of the sellers warranty. Scope of Supply Article Number Quantity Centrifuge Pico 17 / 21 Power supply cable If any parts are missing, please contact your nearest Thermo Fisher Scientific...

Intended Use • This centrifuge is a laboratory product designed to separate components by generation of a relative centrifugal force. It separates human samples (e.g. blood, urine and other body fluids) collected in appropriate containers, either alone or after addition of reagents or other additives. • As general-purpose centrifuge, it is designed to also run other containers filled with chemicals, environmental samples and other non-human body samples. • Together with the hematocrit rotor 75003473 the centrifuge can be used as an in-vitro diagnostics device to define the hematocrit value by...

Precautions In order to ensure safe operation of the Pico 17 / 21, the following general safety regulations must be followed: • The centrifuge should be operated by trained specialists only. • The centrifuge is to be used for its intended use only. • While handling centrifuge, rotor, and samples you must wear laboratory clothing (e.g. gloves). • Do not move the centrifuge while it is running. • Do not lean on the centrifuge. • Use only rotors and accessories for this centrifuge which have been approved by Thermo Fisher Scientific. Exceptions to this rule are commercially available glass or plastic...

Please pay particular attention to the following aspects: • Location: well-ventilated environment, set-up on a level and rigid surface with adequate load-bearing capacity. • Rotor installation: make sure the rotor is locked properly into place before operating the centrifuge. • Especially when working with corrosive samples (salt solutions, acids, bases), the accessory parts and vessel have to be cleaned carefully. • Always balance the samples. Centrifuging hazardous substances: • Do not centrifuge explosive or flammable materials or substances which could react violently with one another. •...

Introduction and Description Contents • “Characteristics of the Pico 17 / 21” on page 1-2 • “Technical Data” on page 1-2 • “Directives, Standards and Guidelines” on page 1-4 • “Functions and Features” on page 1-4 • “Mains Supply” on page 1-5 • “Rotor Selection” on page 1-5

Introduction and Description Characteristics of the Pico 17 / 21 Characteristics of the Pico 17 / 21 Several rotors with a wide range of tubes can be used. The set speed is reached within seconds. The maintenance-free induction motor ensures quiet and low-vibration operation even at high speeds, and guarantees a very long lifetime. The user-friendly control panel makes it easy to pre-set the speed, RCF value, run time, and temperature. You can choose between the display of speed and RCF or the entry mode. These settings can be changed even while the centrifuge is running. With the help of the...

Introduction and Description Technical Data Table 1-1. Technical data Pico 17 Feature Maximum RCF-Value at nmax Maximum Kinetic Energy Noise Level at maximum Speed Dimensions Height Width Depth Weight with emptyRotor Table 1-2. Technical data Pico 21 Feature Environmental Conditions -Use in interior Spaces -Altitudes of up to 2,000 m above Sea Level -max. relative humidity 80 % up to 31 °C; decreasing linearly up to 50 % relative humidity at 40 °C. Permissible Ambient Temperature during Operation Permissible Ambient Temperature during Storage and Transport Overvoltage Category Pollution Degree...

Introduction and Description Directives, Standards and Guidelines Table 1-2. Technical data Pico 21 Feature Height Width Depth Weight with empty Rotor Directives, Standards and Guidelines Table 1-3. Directives, Standards and Guidelines Region 2011/65/EU RoHS Directive on the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment Protective goals of: 2006/42/EC Machinery 2014/35/EU Low Voltage 2014/30/EU Electromagnetic Compatibility (EMC) FDA listed Product code JQC centrifuges for clinical use Device class 1 CFDA listed Thermo Scientific

Introduction and Description Functions and Features Functions and Features The following table gives an overview of the important functional and performance characteristics of the Pico 17 / 21. Table 1-4. Functions and Features Component / Function Description / Features Structure / Housing Sheet Metal with attached Plastic Housing and Steel Chamber Rotor Chamber Plastic Up to 48 ml of spilled Liquid is retained in the Chamber and cannot enter the Instrument. Induction Drive without Carbon Brushes Easy-to-clean Keypad and Display Surface Internal Memory The most recent Data is saved RCF, Temperature,...

Introduction and Description Rotor Selection Rotor Selection The Pico 17 / 21 is supplied with a rotor. Various rotors are available to choose from. Microliter 24 x 2 Hematocrit Rotor The technical data of the rotors and the corresponding adapters and reduction sleeves for various commercially available containers can be found in the corresponding rotor operating manuals. For more information visit our website at: http://www.thermofisher.com Thermo Scientific