Company Brochure
1 / 16Pages

Three-Tec GmbH Your partner for feeding systems extruders, process equipment and special machinery Three-Tec GmbH | Birren 20 | CH-5703 Seon | Switzerland | www.three-tec.ch

THREE-TEC – YOUR PARTNER FOR HIGHEST QUALITY AND CUSTOMIZED SOLUTIONS Three-Tec is the specialist for the development and production of feeding systems, extruders and process equipment in process technology. We offer our international customers from all demanding industrial sectors a comprehensive range of quality products, rounded off by competent advice and fast, reliable and individual service. Thanks to the in-house development and manufacture of our products, we can offer our customers the highest quality standards and the greatest possible flexibility and are able to develop...

HIGHLIGHTS OF OUR FEEDING SYSTEMS O Efficient feeding even of poorly flowing materials Various solutions for gravimetric and volumetric feeding Quick assembly and disassembly of all components in contact with the product Dismantling of the feeding screws uncomplicated without tools Customer requirements are implemented during development and production A wide range of throughputs Smallest quantities from 5 g per hour up to several tons APPLICATION AREAS Feeding systems Our extensive product range includes a large number of feeding systems with screw diameters from 5 to 130 mm. From very...

FLAT-TRAY FEEDERS TWIN AND SINGLE SCREW FEEDERS Three-Tec‘s flat-tray feeders guarantee precise volumetric and gravimetric feeding of good to poor-flowing, moist or bridging products with flowabilities of ffc 1 - 5. All flat-tray feeders can be supplemented with a scale and control system at any time and operated as a gravimetric «Loss in Weight» or «Gain in Weight» and as a continuous system, or used for batch filling. Twin and single screw feeders allow precise volumetric and gravimetric feeding of well-flowing powders, granules, micro-granules, grain, pellets, chips, flakes and short...

At Three-Tec you can put together your feeding system according to your needs. You can choose from various controls, drives and scales. In order to configure the feeding system perfectly for the respective process, Three-Tec offers a wide variety of options: Outlet pipe Control system More options Depending on the application and process requirements, vertical or horizontal discharge tubes can be mounted. The connection to customer systems can be adapted and prepared. Bellows In order to avoid interference with gravimetric systems due to dust protection, bellows are as flexible connections....

HIGHLIGHTS OF OUR EXTRUDERS Screw diameter different screw diameters (5 to 100 mm) and L/D ratios (15:1 to 60:1) available Temperature gradients Steep temperature gradients between segments are possible due to deep cuts in the barrel Quick assembly and disassembly Tri-clamp and bayonet connections enable a hig her sample throughput Easy cleaning designed for easy cleaning and simple cleaning validation Compact and lightweight Due to their small size and light weight, the mini extruders are easy to transport Low active ingredient requirement Mini-extruders with low active ingredient...

UTILISATION Multifunction extrusion from small quantities to production scale for research and development as well as production applications. Extrusion results are optimally suited for upscaling or downscaling. The extruders perform complex extrusion tasks under difficult conditions such as high pressure, high torque or steep temperature gradients. The extruders are equipped with easily exchangeable tools, which are individually structured and adapted to the extrusion task by different segments such as conveying, return conveying, kneading or LABORATORY EXTRUDERS With screw diameters...

OPTIONS AND ACCESSORIES Barrels Screw diameter from 5 to 100 mm The extruder barrels are manufactured entirely in-house at our site in Seon. Customer requirements can thus be taken into account flexibly and easily. The extruder screws are configured customer-specifically based on the process task and manufactured in-house Three-Tec offers the following types of screws: Advantages of Three-Tec extruder barrels: > Monobloc screws (demanding screw geometries, made from one piece) > Standard screws (made from one piece) > Modular screws (interchangeable screw segments) > Configuration...

Pelletizer The pelletizer can be used to process strands into pellets or granules. The speed of the feed roller and the cutter are independently adjustable. This allows the extrudate feed to be perfectly matched to the extrudate and the pellet length or pellet size to be adjusted between 0.5 and 10 mm during processing. @ o Laboratory Research & Hot cutter Spheronizer With the hot cutter, the extrudate can be reliably processed into pellets or granules with one or more knives in direct contact with the die plate. Both wet and melt extrudates can be processed. The number of knives used and...

Film roller Food Pharma The conveyor belt is suitable for gentle removal and cooling of the extrudate. In order to achieve more efficient cooling of the extrudate, a cooling tank can optionally be integrated on which the belt rests and is continuously cooled. This enables the haul-off of extrudates with a temperature of up to 300 °C. The belt speed can be variably adjusted between 0 and 15 m/min. © © Laboratory Research & The film roller from Three-Tec enables the calibration of flat, dry extrudates. Furthermore, round extrudates can also be rolled into a film with a defined thickness....

Stuffing feeding device Stuffing feeding devices are used for the reliable feeding of very poorly feedable or very cohesive and very light products into an extruder. With the stuffing feeding device, products are pressed into the barrel of the extruder from above. Side feeding device Side feeding devices are used for the forced feeding of powders and granules into an extruder. Three-Tec manufactures side feeding devices for all extruder sizes and throughput ranges. Special machinery Three-Tec develops and manufactures a wide variety of special machinery according to customer requirements....