The TSL-7000 H and Z series slit lamps combine elegant design with modern technology, representing excellence in both design and substance. Enjoy the difference: easy handling and ideally located on-board illumination control - offering high quality accuracy and reliability Both models offer a high level of examination accuracy for you and your patients. Excellent features + Extensive filter and accessory set with integrated yellow filter Digital versions only + Workstation with application software + Integrated, highly sophisticated camera system Objective lens focal distance 107 mm Objective lens convergence angle 13° SLIT PROJECTION AND BASE Slit width 0 mm to 12 mm continuously variable Slit length 12 mm (1.0-12 mm continuously variable) Filters Clear, red free, neutral density, diffuser, blue, IR heat-absorbing filter permanently installed Slit angle ±90° continuous Slit rotation ±90° with reference scale Base travel 25 mm z-axis, 107 mm x-axis, 110 mm y-axis Horizontal fine adjustment 12 mm TOMEY EUROPE TOMEY GMBH TOMEY GmbH is the European headquarter of TOMEY Corporation, 2-11-33 Noritakeshinmachi Nishi-Ku, Nagoya, 451-0051, Japan 2025/07 - subject to change without notice Always read and follow the instructions for use. Not all products, services or offers are approved or offered in every market. Please note that the current status of approval for the labelling, instructions and contents of the brochure may vary from one country to another. ADDITIONAL FEATURES Auxiliary diffuser, yellow filter integrated to optical body DIMENSIONS AND ELECTRICAL REQUIREMENTS 350 mm x 410 mm x 702 mm Switch mode, (100 V to 240 V input) ±10% multi plug compliant to EN 60601-1, EN 61000-6-2, EN 61000-6-3 TSL-7000Z SPECIFICATIONS Integral USB hub, joystick trigger system, auto left / right detection, ±camera exposure controls, freeze frame image review control External LED background illumination system, blue filter for background illumination system CAMERA SYSTEM Resolution 3.0 MP, 2048 x 1536