Water Filtration Cyanoacrylate Fuming Chamber TopAir's Water Filtration Cyanoacrylate Fuming Chamber is used to develop latent prints from non-porous surfaces in a safe, controlled environment. • Control system displaying all parameters of the processing cycle. Cyanoacrylate is placed inside the chamber while evidence is easily positioned using the adjustable hanging rods. Starting the cycle triggers the automated system to control the hotplate, humidity, door lock, internal circulation fan, and purge cycle. • Automatic heating control is determined according to the amount of cyanoacrylate placed in the chamber. The Cyanoacrylate vapors are filtered using water filtration. This ensures that no dangerous substances are exhausted in to the atmosphere surrounding the laboratory. • Water Filtration • Automatic temperature control Humidity control ensures ± 3% humidity • Eco-friendly, cost-saving LED lighting. • CE certified The reaction of the fumes of cyanoacrylate to water causes the fumes turn into to non-hazardous plastic residue. The filtration tank is equipped with a draining tap and a built-in washing/ refilling pipe. Removal of the filtration tank is not required for washing and refilling. The unit’s recirculatory design enables the system to operate and setup with no ducting required. Its ductless construction also allows the unit to be easily moved and transported. Control System Main power, automatic cycle, light Electric lock

CUSTOM SIZES AVAILABLE! Airflow (m3/hr) Dimensions WxDxH Noise Lighting Main Filter (Qty.) Temp & Humidity Accuracy Temperature Fan Power Supply Switches Monitoring Construction Production/Test Standard High Pressure 115 / 230V 50/60 Hz, Single phase Main ON/OFF Electronic Display Polypropylene Structure, Safety Triplex Glass CE Tel : +1-855-6-TOPAIR (+1-855-686-7247) Email: [email protected] Web: www.topairsystems.com I Headquarters USA: 8912 68th Avenue Forest Hills New York 11375, USA 59