Aluminum Cyanoacrylate Fuming Chamber
2Pages

{{requestButtons}}

Catalog excerpts

Aluminum Cyanoacrylate Fuming Chamber - 1

Aluminum Cyanoacrylate Fuming Chamber TopAir's Cyanoacrylate Fuming Chamber is used to develop latent prints from non-porous surfaces in a safe, controlled environment. • Control system displays all parameters of the processing cycle Cyanoacrylate is placed inside the chamber while evidence is easily positioned using the adjustable hanging rods. Starting the cycle triggers the automatic system to control the hotplate, humidity, door lock, internal circulation fan and purge cycle. • Can be activated automatically, or manually with an option for temperature and humidity control The system's recirculatory design enables it to operate and setup with no ducting required. The cyanoacrylate vapors are filtered by a carbon filter. This ensures that no dangerous substances are exhausted into the atmosphere surrounding the laboratory. Its ductless construction also allows the unit to be easily moved and transported. • Adjustments to the presets can quickly be performed • Filtering system with a carbon filter • Eco-friendly, cost-saving LED lighting • CE

Open the catalog to page 1
Aluminum Cyanoacrylate Fuming Chamber - 2

Models Spec/Model (Tested 20 cm from the work table, 1.2m above ground) Lighting Power Supply Main ON/OFF Electronic Display Aluminum Frame Structure, Safety Triplex Glass Production/Test Standard Programmable Electronic Control The electronic control system includes easy on-screen functions to program the Purge Cycle, Contact Time and RH Sensor. Filter Type Main Filter Main and Pre Filters are supplied as standard with all chambers and are listed here for replacement purposes. * Prefilters are supplied with all units. Efficiencies are over 99.6%. The filters remove particles from the...

Open the catalog to page 2

All TopAir Systems catalogs and technical brochures

  1. FR-WT-12080

    1 Pages