IS-1 Series
1 / 16Pages

Catalog excerpts

IS-1 Series - 1

A TOPCON OTHERS SOLUTION Ophthalmic unit IS-1 Series

Open the catalog to page 1
IS-1 Series - 2

IS-1 Series IS-1 The IS-1 series is Topcon’s own development and The developed ophthalmic unit IS-1 offers you a wide production, and is the top of the range of ophthalmic range of options to create a unit that full fill’s all your units that Topcon has to offer. The IS-1 series needs on refraction, slit lamps and other instruments. distinguishes itself through quality, design, configuration The rotatable sliding table top accommodates up to variety and colour options, and therefore the high class two instruments and is available, as standard with solution for your modern practice...

Open the catalog to page 2
IS-1 Series - 3

IS-1 Series IS-1D The IS-1D is especially designed to accommodate three instruments on a rotating table top which comes as standard with two electro-brakes controlled by a footswitch. Similar to IS-1 the tabletop can be elevated. Curtain control is standard with the IS-1D. The IS-1D is available in right and left versions as well as a wheelchair option. The cable management system enables clean installation of all instruments. You can choose a single trial lens drawer or a three drawers version which can optionally accommodate the power supply of the Topcon CV-5000 phoropter system. The...

Open the catalog to page 3
IS-1 Series - 4

IS-1 Series IS-1P Ophthalmology needs differ, and with this in mind Topcon has developed the IS-1P parallel unit. This unit is supplied with a powered linear sliding tabletop to accommodate two instruments. The VT-1L linear automated phoropter arm is synchronised with the elevation movement of the tabletop. The optional monitor support allows installation of a TFT monitor for user convenience. The IS-1P can also be supplied with an optional large desk to meets the requirements of a busy ophthalmic practice. » wo instrument electrical driven parallel sliding tabletop T » ntegrated cable...

Open the catalog to page 4
IS-1 Series - 5

IS-1 Series furniture The IS-1, IS-1D and IS-1P can be supplied with optional furniture in the same colour setting as the ophthalmic unit. Trial lens drawer The trial lens drawer consists of a single drawer which can be placed beside the unit or next to the chair. At the same time it is a storage platform for the IS-1 series touch screen control panel. The perfect solution to accommodate your trial lens set. Power supply drawer The power supply drawer consist of three drawers, and can optionally accommodate the power supply unit of the Topcon CV-5000 phoropter. IS-1 / IS-1D PC-Desk The...

Open the catalog to page 5
IS-1 Series - 6

IS-1 Series colours IS-1 series colour choices The whole IS-1 ophthalmic unit series can be composed out of no less than 10 colour combinations. The basic colour of the unit, pole and tabletop can be modern white or dark grey. Five colours are available for the finishing set of the unit, the trial lens drawer, the power supply drawer, pc-compartment and the IS-1P drawers. Among these options there are two wood finishing’s available. Colour images may vary from original Maple (wood) Cedar (wood)

Open the catalog to page 6
IS-1 Series - 7

IS-1 Series colours Colour combinations The variety of colour combinations for the IS-1 series gives you the opportunity to fit this unit in any modern optician shop or ophthalmic practice. The Cedar and Maple wood finishing gives the unit that luxuary appearance that gives your practice just that finishing touch. Colour images may vary from original

Open the catalog to page 7
IS-1 Series - 8

IS-1 Series standard accessories Touch screen control panel The IS-1 series touch screen is a satellite panel which can be placed on any flat surface of your choice. It controls various functions. » hair / tabletop motion C illumination » eading LED light R » tatistics S » ettings menu S Chair and table up/down motion. Dimming of room light and reading VT-1L phoropter control, up/down Reset chair and table. light by swiping the touch screen. Control of open and close of the Safety-stop The safety-stop guarantees patients safety when operating the elevation of tabletop or chair. The IS-1P is...

Open the catalog to page 8
IS-1 Series - 9

Wheelchair accessibility Wheelchair accessibility One of the features of the IS-1 series is that the IS-1 and IS-1D are also available as wheelchair accessible ophthalmic stand in both right and left versions. The IS-1P is available in a right wheelchair accessible version. The small footprint of the standalone ophthalmic unit allows the user to easy position any wheelchair type for patients comfort during the examination. In this configuration the ophthalmic chair such as OC- 10/12 can be moved aside with the use of its own baseplate on wheels in order to make the unit accessible for...

Open the catalog to page 9
IS-1 Series - 10

IS-1 series optional accessories LED near vision lamp The adjustable LED reading lamp provides crisp white illumination which supports reading examinations. Potentiometer The optional potentiometer based on the tabletop can be used for regulating illumination dimming of any instrument which does not have illumination dimming on board. Projector support The dedicated IS-1 series projector support allows mounting of Topcon chart projectors. Monitor support The dedicated IS-1 series monitor support allows the user to mount a TFT screen for user convenience.

Open the catalog to page 10
IS-1 Series - 11

VT-80 Phoropter arm The VT-80 phoropter arm enables mounting of most available phoropter heads. The mechanical lock ensures fixed positioning of the phoropter in front of the patient. VT-81 Phoropter arm The VT-81 phoropter arm is provided with a handle for easy manoeuvring of the phoropter. A spring loaded counter balance ensures positioning of the phoropter. VT-1L Powered linear phoropter arm The VT-1L is a linear phoropter arm which is specially designed to accommodate the CV-5000 computerized phoropter. The cable management kit provides a clean installation. The automatic movement of...

Open the catalog to page 11
IS-1 Series - 12

IS-1 series optional accessories OC-10 The OC-10 patient chair is designed to provide a comfortable seat for patients during examination. The standard arm rests are foldable and the chair can rotate by 120°. An optional footrest is available to enhance patient’s comfort. The up-down stroke of the chair has increased in order to allow easy access and usage for patients. Footrest optional OC-12 The OC-12 is similar to OC-10 without armrest. Footrest optional OC-14 The OC-14 patient chair comes with all options, such as full leather-look upholstery, reclinable armrest, horizontal seat...

Open the catalog to page 12

All Topcon Healthcare catalogs and technical brochures

  1. HARMONY

    7 Pages

  2. Aladdin

    11 Pages

  3. CV-5000PRO

    10 Pages

  4. SOLOS

    4 Pages

  5. CL-300

    6 Pages

  6. TRK-2P

    8 Pages

  7. KR-1W

    7 Pages

  8. KR-1

    8 Pages

  9. KR-800S

    10 Pages

  10. KR-800PA

    2 Pages

  11. KR-800A

    6 Pages

  12. Chronos

    8 Pages

  13. ACP-8

    4 Pages

  14. CC series

    5 Pages

  15. ATE Series

    10 Pages

  16. FS-1 series

    4 Pages

  17. IS-600 III

    12 Pages

  18. IS-100

    8 Pages

  19. SP-1P

    8 Pages

  20. Henson 9000

    9 Pages

  21. CT-1P

    10 Pages

  22. CT-800A

    6 Pages

  23. CT-800

    4 Pages

  24. MYAH

    8 Pages

  25. CA-800

    9 Pages

  26. TRC-50DX

    5 Pages

  27. Signal

    2 Pages

  28. TRC-NW400

    8 Pages

  29. Maestro2

    16 Pages

Archived catalogs

  1. VT-10

    4 Pages