TL-B10 DIRECT DRIVE CIRCULATION PUMP FOR MEDICAL

Product catalog summary

Overview: The document provides technical specifications and features of a range of micro DC brushless pumps, specifically models TL-B10-B and TL-B10-C, designed for various applications such as hot water dispensers, water purifiers, vending machines, and more.

Key Features:

Super quiet operation at 35dB(A).
Certified by FDA, NSF, and WRAS.
Long working life of 20,000 hours.
Compact size and lightweight design.
Intelligent control with speed regulation.
Resistant to high temperatures up to 100°C.

Specifications:

Noise level: ≤35dB(A).
Continuous working mode.
IP68 protection level.
Coil insulation class: Class F.
Ambient temperature range: -40°C to 40°C.
Liquid temperature range: -40°C to 10°C (31W pump up to 75°C).
Pumps must not run dry and require continuous flooded suction.

Performance Data:

Maximum flow rate is achieved when the water head is 0 meters.
Highest lift is achieved when water flow is 0 L/min.
Customization options include PWM or 5V speed control and FG (RPM) signal wire.

Model Specifications:

TL-B10-B12-0905 and TL-B10-B24-1208 models with rated voltages of 9V, 12V, and 24V.
Rated flow rates and maximum water head vary by model.
Standard and selectable pump versions available with specific dimensions and performance curves.

Contact Information: For further inquiries, contact TOPS Industry and Technology (Micro Pump & Motor) Co., Ltd via email at [email protected] or phone at +86-731-82739266.

Catalog excerpts

TL-B10 DIRECT DRIVE CIRCULATION PUMP FOR MEDICAL-1

TL-B10 Micro DC Brushless Pump TL-B10-B Typical Applications Hot Water Dispenser, Water Purififier Resistant to 100°C high temperature Vending Machine Beverage Dispenser Auto Air-conditioning System 20,000 hours long working life Small size, light weight Cooling Circulation System Intelligent control speed regulation 3D Laser Printer Cooling Battery Cooling System Water tank Circulation of heat pump heater Purifying humidifier Specication At Max Efficiency Point Product Code Max Water Flow (L/min) Rated Power(W) Rated Spec. (L/min @ M) Customization: 1. /PWM or /5V speed control The data in the table is the measured performance when pure water is delivered at normal temperature. The maximum flow rate is the flow rate when water head is 0 meter, and the highest lift is the lift when water flow is 0 L/min. IP level:Ip68 Coil Insulation class:Class F Ambient temperature: -40 °C ~40 °C Liquid temperature: -40 °C ~100°C (31W pump 75 °C only) Working mode:Continuous Pumps must be in a continuous flooded suction env

Open the catalog to page 1

TL-B10 DIRECT DRIVE CIRCULATION PUMP FOR MEDICAL-2

TL-B10 Food Grade DC Pump Note: pump A / D / F lead wire pls refer to B / C type pump Standard Version Pump B Standard Version Pump C TOPS Industry and Technology (Micro Pump & Motor) Co.,Ltd E-mail:[email protected] Web:www.topsflo.com Phone:86-731-82739266 Wechat/Whatsapp: +86-193766

Open the catalog to page 2

All TOPS INDUSTRY AND TECHNOLOGY CO., LIMITED (TOPSFLO catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list