Document Overview:
This document is a Composite Teeth Mould Chart issued by TorosDental, a dental manufacturing company based in Antalya, Turkey. The issue date is June 1, 2016, and it references compliance with ISO 22112:2017 and ISO 13485:2016 standards, indicating adherence to quality management systems for dental products.

1. Company Information

• Company: TorosDental İnş. İth. İhr. San. VE Tİc. A.Ş.
• Address: Varsak Menderes Mah. 6911 Sokak No:3, Kepez, Antalya, Turkey
• Contact: Tel +90 242 247 76 16, Fax +90 242 244 02 14
• Emails: [email protected], [email protected]
• Websites: www.torosdental.com, www.teethmanufacturing.com

2. Product Specifications - Composite Teeth Mould Dimensions

The chart provides detailed dimensional data for various composite teeth mould codes. Each mould code (e.g., K1, K4, M2, L3, E2, etc.) is associated with three key measurements, all in millimeters (mm):

• Measurement 1: Typically represents length or height (values range approximately from 31.7 mm to 49.0 mm)
• Measurement 2: Width or thickness (values range approximately from 7.6 mm to 12.4 mm)
• Measurement 3: Depth or another dimensional parameter (values range approximately from 4.5 mm to 9.3 mm)

Example: For mould K1, the dimensions are 40.4 mm, 8.3 mm, and 7.4 mm respectively.

3. Combination Chart

This section lists compatible combinations of mould codes, indicating which moulds can be paired or used together. For example:

• K1 combines with E1 and N1
• K3 combines with E1 and N1 or N2
• L5A combines with E7A and N6

This helps in selecting appropriate mould combinations for dental prosthetics.

4. Additional Dimensional Data for N-Series Moulds

Additional measurements are provided for N-series moulds (N1 to N6), with four parameters each, also in millimeters:

• N1: 29.0, 31.0, 8.5, 8.0
• N2: 31.2, 33.0, 8.2, 8.6
• N3: 30.5, 33.4, 8.9, 8.7
• N4: 30.0, 33.0, 8.0, 8.4
• N5: 34.2, 35.5, 9.4, 9.4
• N6: 47.3, 9.3, 8.9 (incomplete data)

5. Notes and Standards

• All measurements are given in millimeters.
• The document references ISO standards relevant to dental product manufacturing and quality assurance.

Critical Information and Best Practices

• Ensure correct mould selection by referring to the combination chart to maintain compatibility.
• Use precise measurements for manufacturing and fitting dental prosthetics to ensure quality and patient comfort.
• Adhere to ISO 22112:2017 and ISO 13485:2016 standards for quality management and product safety.

Summary:
This technical document serves as a reference for dental professionals and manufacturers to select and combine composite teeth moulds accurately based on standardized dimensions and compatibility charts. It supports quality control and product consistency in dental prosthetic fabrication.