*mymedicalexpo

Pneumatic cylinder

Product catalog summary

Overview: This document provides technical specifications and data for Type B double-acting pneumatic cylinders with linear ball guides. These cylinders are designed to handle stress from all sides and can be equipped with end position cushioning.

Specifications:

Design Type: Pneumatic cylinder with linear ball guide
Stroke Lengths: 10, 25, 50, 80, 100, 125, 160, 200 mm
Fitting Position: Any, provided the extended position is possible
Temperature Range: -10 to +70°C
Medium: Filtered, oiled or non-oiled compressed-air (min. fineness 40 µm)
Compressed-Air Supply: Front, lateral, or combi-type (8 mm only front type)
Compressed-Air Pressure: Min. 2 bar, Max. 6 bar
Materials: Various materials including aluminum for the base body and 100 Cr 6 for guides

Dimensions and Weights:

Detailed dimensions are provided for piston and piston rod diameters, along with various lengths and weights for different stroke lengths and cylinder types.

Admissible Stress:

Data on longitudinal, lateral, and transverse torque for different stroke lengths and cylinder types are provided.
Correction factors for stress calculations are included.

Example Calculation:

An example is provided for calculating the required force using a 25-B cylinder with a stroke length of 80 mm, demonstrating the application of correction factors and torque calculations.

Catalog excerpts

Pneumatic cylinder Type B double-acting Linear ball guide 0 8/10/16/20 25/32/40 mm The guides consist of hardened and ground steel rods provided with linear cages for balls, which allows to apply stress on all sides. These pneumatic cylinders can also be supplied with end position cushioning (see order data). Technical data: Edition 2003 Subject to modifications

Open the catalog to page 1

Edition 2003 Subject to modifications

Open the catalog to page 2

Pneumatic cylinder Admissible stress Lateral torque Longitudinal torqueTransverse torque No. 1.2.1.3

Open the catalog to page 3

Pneumatic cylinderAdmissible stress Stroke length [mm]

Open the catalog to page 4

Given qty: 25 - B with a stroke length of 80 mm Lever arm Li = 40 mm = 0,04 m Longitudinal torque Mi = 6,7 Nm Correction factor A = 102,4 mm = 0,1024 m = 47 All data based on tests conducted by TOSS.

Open the catalog to page 5

All Toss GmbH & Co. KG Verpackungssysteme catalogs and technical brochures

Type 775
1 Page
772-D + DS
2 Pages
type-238
2 Pages